Silicone electric heating pads generate heat in a surface shape, and when heated, the entire surface generates heat instead of spreading heat.
The editor of the electric heater manufacturer introduces the working principle of the electric heater:
Secondly, the internal heating part of the silica gel electric heating plate is the arranged nickel-chromium alloy wire (our company uses multiple strands) or the designed iron-chromium-aluminum alloy etching plate. The latter heats evenly, with small temperature differences and thermal conversion. high
Silicone rubber heating belt with 3M glue.jpg
Third, the silicone silicone electric heating sheet is a flexible heater, and the thickness is generally 1.5MM. The silicone rubber cloth used has thermal conductivity, so the heat loss during heating is quite small.
Fourth, the silica gel electric heating sheet has strong workability, and is basically designed according to the shape of the heated body, so it can be attached to the heated body very well.
Fifth, the silicone electric heating plate is either pasted on the heated body or mechanically fixed during installation, but no matter which method is used, it can achieve a good heating effect.
Sixth, the insulating material used in the silica gel electric heater has a high temperature resistance of 250 degrees, so it can basically meet the general heating requirements
Seventh, the silicone electric heating film can be installed with a temperature adjustment control table according to user requirements, so that accurate temperature requirements can be obtained.
Eighth, the silicon rubber electric heating sheet can realize internal heating and external temperature control methods.
