Silicone electric heating film is a kind of sheet heater commonly used in industrial production for heating, heat preservation and dehumidification. The heating film has many good performances and saves a lot of production costs for enterprises. With the continuous application of silicon rubber electric heating films, There are also many problems, and the common questions are as follows:
Knob temperature control silicone rubber heating belt.jpg
1. The heating plate is surface heating, and the whole surface is heated when heating, not point heating. The working principle of the diffusion silicone heater
2. The internal heating part of the silica gel electric heating plate is arranged by nickel-chromium alloy wire (our company uses multiple strands) or a designed iron-chromium-aluminum alloy etching plate. The latter heats evenly, with small temperature difference and high heat transfer.
3. Silicone electric heating sheet is a flexible heater, the thickness is generally 1.5MM, the silicon rubber cloth used in it has thermal conductivity, so the heat loss during heating is quite small.
Fourth, the electric heating sheet has strong workability and is basically designed according to the shape of the heated body, so it can be attached to the heated body very well.
5. The silicone electric heating sheet is either pasted on the heated body or mechanically fixed during installation, but no matter which method is used, it can achieve a good heating effect.
6. The insulating material used in the silicone electric heating film has a high temperature resistance of 250 degrees, so it can basically meet the general heating requirements
7. Silicone electric heating film can be installed with temperature adjustment control table according to user requirements, so that accurate temperature requirements can be obtained
8. The electric heating plate can realize internal heating and external temperature control methods.
The above is the relevant content introduced to you by the heater manufacturer, I hope it will be helpful to you.
