+8613456528940

What is the difference between electric tracing and electric heating?

Feb 27, 2023

Electric heating is mainly used for antifreeze insulation and temperature maintenance of pipelines, tanks, instrumentation equipment, and heating; snowmelt and ice melting of roads and buildings; Heat compensation for production processes, etc. Because the heating effect is not achieved, it is called "heat tracing". Electric heat tracing is referred to as "heat tracing" or "electric tropics", which is divided into self-limiting temperature electric heat trace and constant power electric heat trace.

According to the classification of industrial and civil special industries, electric tracing is generally divided into three categories:

A: One category is electric heat tracing, such as: constant power electric heat tracing, self-limiting temperature explosion-proof electric heat tracing, MI heating cable, anti-corrosion sampling composite tube and skin heating system

B: The second category is civil electric heat tracing, such as solar power tracing, non-explosion-proof self-limiting temperature electric tracing, electric floor heating and smart electric heating

C: The three categories are special electric heat tracing, such as: silicone rubber electric heat tracing, fire special electric heat tracing, ceramic electric heat tracing

The output power of self-controlled temperature electric heat trace refers to the output power per unit length of cable under the condition that the ambient temperature is 10 degrees Celsius. According to the classification of heating power output, there are three types of self-controlled temperature electric heat tracing. Generally speaking, the heating power is less than 35 watts / meter for low-power electric tracing; Medium power electric heat trace if the heating power is greater than 35 watts / meter and less than 70 watts / meter; Heating greater than 65 watts per meter is a high-power electric heat trace.

Constant power electric heat tracing can be divided into two categories according to the working principle, parallel type and series type, of which the parallel type is divided into single-phase and three-phase 2 categories according to the different working voltage.

Working principle: The power bus of this type of product is 2 (single-phase) or 3 (three-phase) parallel insulated copper stranded wires, and nickel-chromium heating wires are wound on the inner sheath insulation layer, and the heating wire and the bus bar are staggered and connected at equal distances to form a continuous parallel resistance. When the bus bar is connected to 220V or 380V voltage, each parallel resistor heats up at the same time, forming a single-phase or three-phase continuous power supply trace.

Parallel constant power electric tropical due to mature technology, good product performance, stable and reliable quality, easy installation and use, wide adaptability, long life, so it is currently widely used at home and abroad an electric heating product, all steam, hot water heating places can use the product, of which the three-phase belt is especially suitable for long-distance large-diameter pipeline heat tracing. Constant power electric tropics are divided into ordinary type and reinforced type according to different structures. Generally, buried or corrosive gas (liquid) sites should be selected as reinforced types; Marine reinforced types should be used in offshore platforms, docks and beach areas; Overhead pipeline equipment with better conditions can choose ordinary type.

 

mmexport1532393168204

mmexport1532393173046

NMZTA5IR6HXZNQA

Roof and Gutter De-icing Self-Regulating Heating Cable 001

Roof and Gutter De-icing Self-Regulating Heating Cable 002

self regulating heating belt 253

Send Inquiry