In the general PTC heating tube market, many unqualified electric heaters have slowly merged into this big market. The integrated heating fins make the usual PTC heating tube market mixed with others. How can we distinguish the advantages of heaters? Inferior, it used to be the preparatory work for Kuanguang customers before purchasing various heaters.




The easiest way to verify the pros and cons of PTC heating tubes:
Wipe the surface of the PTC heating tube first, then switch on the AC 220V power supply, dry it in the air, and turn off the power after the surface turns red. After the PTC heating tube has cooled down, wipe it with a napkin. There should be no black oxide powder on the white paper ( It does not react with the oxygen in the air), indicating that it is a high-quality PTC heating tube.
PTC heating element is also called PTC heater, which is composed of PTC ceramic heating element and aluminum tube.
It is composed of galvanized outer pressure plate, stainless steel corrugated spring sheet, galvanized inner pressure plate, single-layer aluminum heat sink, ptc heating sheet, double-layer aluminum heat sink, nickel-plated copper electrode terminal and pps high temperature plastic electrode sheath. Due to the U-shaped corrugated heat sink, the product has improved its heat dissipation rate, combined the advantages of adhesive and mechanical, and fully considered the various thermal and electrical phenomena of the ptc heating element during work, and its separation force is strong. , Excellent heat conduction and heat dissipation performance, high efficiency, safety and reliability. This type of PTC heater has the advantages of low thermal resistance and high heat exchange efficiency. It is an electric heater with automatic constant temperature and power saving. One of its outstanding features lies in its safety performance. Even when the fan stops rotating due to the shortcomings of the fan, the power of the PTC heater will automatically drop sharply due to insufficient heat dissipation. At this time, the surface temperature of the heater is maintained at about the Curie temperature ( Normally around 250℃), so as not to produce "redness" on the surface of heaters such as electric heating tubes.
ptc electric heater, also known as PTC heating element, PTC heating element, is composed of selected high-quality PTC heat-sensitive ceramic heating components as the heating source, and is composed of corrugated aluminum strips that are glued, welded and molded at high temperature. Use national standard parts for high-temperature resistant insulation bracket installation, the hole spacing of the bracket screw holes is convenient for customer assembly applications, the over-temperature insurance terminal link is firm, and there is no looseness. Use terminal silicone sheath with good high temperature resistance, corrosion resistance and strong flame retardant performance. Using Japan imported JST pure copper STO-61T-250N crimping terminal. The wiring harnesses are led out with high temperature resistant (300°) PTFE braided wires, and the terminal is installed firmly. When wiring, ensure that the wiring harness is intact, avoiding the occurrence of dropouts and leakage risks.
Direct heating is mainly to use a hot water boiler to directly heat cold water to the required temperature or to pass steam directly into the cold water through a steam boiler to mix and convert it into hot water. Regarding the direct steam heating water supply method, there is high noise, high requirements for steam quality, condensate water cannot be recovered, and the heat source requires a large amount of supplemental water after water quality treatment. It is suitable for public places with qualified steam heat medium and no strict requirements for noise. Bathrooms, laundry rooms, industrial and mining enterprises and other users. Direct heating has the advantages of simple equipment and high thermal efficiency, but it also has the disadvantage of requiring higher heating medium quality and cold water hardness conditions, so it is mainly used in buildings with less water consumption. Direct heating can be divided into boiler direct heating, steam direct heating, solar direct heating, PTC heater direct heating and gas heater.
Indirect heating mainly uses heat exchangers to heat cold water to the required design temperature through a certain heat transfer area. Although its equipment is more complicated than direct heating, and its thermal efficiency is lower, but because the condensed water can be recycled, the hot water temperature and water volume are easier to adjust, and the system has a longer service life, it is widely used and suitable for stable and safe water supply. Hotels, residences, hospitals, office buildings, etc. that require low noise.