+8613456528940

What are the short circuit faults and solutions for electric heating pipes?

Feb 23, 2023

Customers who use heating tubes often encounter the problem of short circuit of electric heating tubes, and today Yancheng Hongchuang will learn with you. We must know that the commonly used heating tubes can be divided into: single-head heating tubes, U-shaped heating tubes, flange heating tubes, finned heating tubes and so on. The first situation: the electric heating tube burns the resistance wire Reason: A. The electric heating tube burns and causes a short circuit; B. The lead or lead of the electric heating tube falls off and causes a short circuit; C. The diameter of the resistance wire is too small and the capacity is insufficient; D. Short circuit caused by dirt accumulation or carbonization of electric heating socket E. Short circuit between the power cord plug and the electric heating socket; Solution: A. Replace the heating tube; B. Re-welding; C. Replace the suitable resistance wire electric heating tube, after the research of Yancheng Hongchuang Technology Department, under normal circumstances, the resistance wire of iron chromium aluminum can be used. D. Remove dirt, repair or replace parts E. Repair or replace power plugs or electric sockets; The second case: the electric heating tube does not heat up reason: A. For the adjustable temperature control heating tube, the thermostat contact is poor or burned and melted off. B. Abnormal power supply or power failure; C. The resistance wire has been blown out; D. The power cord plug is in poor contact with the electric heating socket, or the power cord wire is broken; E. The electric heating tube has burned down; F. The lead or lead of the electric heating tube falls off; Solution: A. The heating tube is not good for maintenance, it is recommended to replace it; B. Use after normal power supply; C. The heating tube is scrapped, and the resistance wire of the same model is reproduced and installed; D. Check the line for repair or replacement; E. Replace and install electric heating pipes of the same specification; F. Re-solder the leads or leads; The third situation: electric heating pipe leakage Reason: A. The circuit wire falls off and the cup body collides; B. The electric heating tube burns out and the cup body is short-circuited; C. The ground wire is not connected; D. Too much dirt in the electric heating socket or power plug; E. Insulation damage of electric heating pipe; F. Improper cleaning, moisture exposed into the cup; Solution: A. Check the fallen wire and re-weld it firmly; B. The electric heating pipe has been damaged and replaced with the electric heating pipe of the same specification; C. Connect the ground wire as required and check whether it is correct; D. Correct cleaning and drying treatment; E. Inspection and repair If such an event still occurs, it is recommended to replace it; F. Correct cleaning and drying treatment

 

IMG20190506101622

IMG20190520134020

IMG20190626193212

IMG20190626193245

Send Inquiry