The PTC type ceramic heater is composed of PTC ceramic heating element and corrugated aluminum strip through high temperature bonding. This type of PTC heater has the advantages of low thermal resistance and high heat exchange efficiency. It is an electric heater with automatic constant temperature and power saving. One of its outstanding features is its safety performance. In any application, it will not produce "redness" on the surface of electric heating tube heaters, which may cause burns, fires and other safety hazards.



1. The PTC type ceramic heater saves cost and has a long life.
It does not require special temperature controllers and temperature sensors such as thermal resistance thermocouples to perform temperature feedback to control the heating of the heater. Its temperature adjustment is based on its own material characteristics, so that the product has a service life that is much longer than other heaters .
2. The PTC ceramic heater is safe and environmentally friendly.
The heater body is designed to have multiple levels of heating temperature below 200 degrees Celsius. In any case, the body does not emit red and has a protective isolation layer. Any application does not require asbestos and other heat insulation materials to cool down. It can be used with confidence. Human burns and fire problems.
3. PTC type ceramic heater saves electric energy.
Comparing electric heating tube and resistance wire heating products, this product relies on the characteristics of the material itself and adjusts its own thermal power output according to the change of the ambient temperature, so it can optimize the heater's power consumption to a minimum, and at the same time, it is a material with high heating efficiency. It also greatly improves the utilization efficiency of electric energy.
The characteristics and quality of PTC components are the key factors that directly determine the performance of PTC heater products. The current PTC heating elements used in constant temperature heating products such as heaters are all high-temperature PTC elements. The Curie temperature is higher than 120°C. Compared with low-temperature PTC elements, there are big differences in manufacturing process and performance parameters. Good PTC characteristics are the basis for obtaining good heating performance.
The main parameters considered when selecting PTC components:
(1) Room temperature resistance R25: for 110~220V voltage, R25 is generally 100Ω~10KΩ, when used for 6~24V, R25 is 0.5~5Ω. Under normal circumstances, R25 is small, the initial current is large, the heating is fast, and the power is also large. But the withstand voltage capability is poor.
(2) The Curie temperature TC should be moderate: under certain conditions, increasing TC can increase the power consumption of the heater, but the TC is too high (greater than 260C), which makes the electrode of the PTC element easy to age, significantly shortening the life, and often Accompanied by thermal breakdown. So generally choose PTC heating element with Curie temperature below 260℃.
(3) The withstand voltage should be high: at least two times the working voltage should be guaranteed to prevent electrical breakdown.
(4) The temperature coefficient of resistance should be large: generally greater than 14, to ensure that it is less affected by environmental temperature changes.
(5) The initial impulse current should be moderate: Generally, the impulse current should be less than twice the value of the stable working current.
(6) The surface temperature of the PTC heating element is controlled by the PTC itself, or it can be controlled by disconnecting the circuit, but the surface temperature cannot be controlled by adjusting the voltage.
(7) PTC itself is highly reliable and has a long lifespan, but if it is improperly assembled, the product will experience unstable power and temperature.
(8) When multiple PTCs are used together, they should be connected in parallel, not in series.