Many users choose cheap heating tubes on the market, and after heating them for a period of time in a liquid, some heating tubes are found to be broken. When the phenomenon of rupture occurs, the heating tube must not be used, and then, if you change it, repeating and repeating it will not be worth the loss. Find out the key to the problem, and prevent it before it happens.
Our factory is a professional manufacturer of heating electric heating equipment. It has been engaged in the production of heating tubes for more than ten years, and encountered the problem of heating tube cracking in the heating tube liquid. The possible reasons are:
Possible reason 1: During the powder filling process, the magnesium powder is mixed with impurities, and these impurities will be carbonized at high temperature, and the tube will burst when it is used for a long time;
Possible reason two: The selection of materials is very important. There are many kinds of stainless steel. Choose the right material according to the environment in which the heating tube is used. The pipe itself is also different. One is a seam pipe, the other is a non-sealed pipe, and the seam steel pipe is welded with steel strips. If there is a little bit of inadequate welding, the pipe will burst. Generally, this problem will not occur in the pipe without seams, and it may be caused by the quality of the seam pipe;
Possible reason three: The liquid used for heating by stainless steel electric heating tubes is also different. Some are corrosive liquids, and some are water. Heating water is sometimes the reason for water quality, because many of them may be groundwater or tap water, which has more impurities and is easy to scale. , Too much and too thick scale will cause the internal temperature to be unable to spread, which will cause the heating tube to burst.
Possible reason four: The wall of the heating tube is too thin or the power setting of the heating tube is too high, the surface load is too large, and the internal temperature is too high, which will easily cause the internal expansion of the heating tube and cause the heating tube to rupture. As for the reasonableness of the power setting, how to determine the power of the heating tube, you can directly inquire
In view of the four reasons that the heating tube is heated in the liquid and the heating tube ruptures during the operation described above, it is not difficult to see that there are many users who can directly avoid the heating tube rupture when purchasing, and the user should strive for it Realizing that the purchase of heating pipes still has to be purchased from a formal enterprise manufacturer, which can be effectively prevented. The problems encountered in the long-term operation of the heating tube should be discussed with the regular manufacturer to find the correct solution.



