In order to ensure the normal operation of the process pipeline in the industrial production process, most of them must take thermal insulation (heat preservation) measures. However, heat dissipation loss is unavoidable during the storage and transmission of the process medium. Heat dissipation means a decrease in the temperature of the medium in the equipment and pipes. So, what are the factors that affect heat loss in electric heat tracing engineering?



First, the maintenance temperature of the pipeline insulation electric heating system is a very important parameter for calculating heat loss, so it is a reasonable choice. If the maintenance temperature is too low, it cannot meet the heat tracing demand of the medium; Conversely, maintaining temperatures that are too high and exceed the need to keep warm will also result in wasted energy, which will add a lot of additional costs.
Second, the type of medium
The specific heat of the medium (oil, hot water, gas, natural gas, etc.) is different, and the content of its calorific value will be different, and the heat loss will also be affected in actual use.
3. The size of the equipment or pipeline
For example: the diameter of the pipe, the diameter of the tank, the larger the size, the more heat is lost.
Fourth, the change of ambient temperature has a greater impact on the loss of medium heat;
The lower the ambient temperature, the greater the heat loss of the electric tracing system at the same trace temperature. To be on the safe side, it is reasonable to confirm that the minimum ambient temperature is acceptable. In addition, wind speed also has an impact on heat loss, and the greater the wind speed, the greater the heat loss.
Electric heat tracing and insulation measures
5. The maximum carrying temperature of electric tracing
Sometimes the temperature required by the equipment is not high, but there is an instant steam purge, which requires the temperature resistance of the electric heating product to be relatively high.
For example, the electric heating application of the desulfurization pipeline in the power plant, through steam purging, the ordinary electric heat trace temperature resistance can not be reached, and it is necessary to choose electric heat tracing and insulation products with high temperature resistance.
6. Thermal insulation materials
The influence of the thickness of the insulation material on the effect of thermal insulation is also very large, and the thermal conductivity of thermal insulation products of different materials is not the same, and the thermal insulation effect is very different. Sometimes, the heat trace requirements can be met by simply changing the type or thickness of the insulation material without replacing the heat trace product, which can save energy and reduce costs.