Installation method of copper pipe for construction project:
1. The copper pipes are currently installed mainly by ferrule type and welding methods. The card sleeve connection was first made in England in this century, and it is more suitable to adopt this method when installing pipes in home construction projects. The biggest advantage of this method is that it is very safe, economical and clean, and the installation speed is relatively fast, and it can bear a certain amount of pressure. This method uses the seal or pressure ring on the engineering copper pipe to connect mechanically. The bite-type connection method can be completed with a simple tool such as a wrench. After installation, it is easier to repair if there is leakage, as long as the nut is tightened.
2. There is also a welding type, among which there are soldering and brazing. These two methods mainly use different metal fillers. They both heat the joints, add solder to dissolve, and suck the dissolved solder to the joint. Welding is generally used in places where the durability of pipes is relatively high, such as in some public construction projects.
