How to remove the heating tube of Samsung refrigerator?
You're talking about the tank heater at the bottom of the evaporator. Unplug the power plug of the refrigerator, use a screwdriver to loosen the fixing screws of the box cover, and then pull out the transparent box cover that is stuck by the stuck feet with a little force, unscrew the heating tube of the refrigerator counterclockwise, buy a new one, and put it back as usual. . After the power-on experiment is completed, gently close the door of the refrigerator, and the door should also be closed lightly at ordinary times, because the heating tube is easily damaged by vibration.
In the refrigeration system, the area size and distribution of the evaporator directly affect the refrigeration capacity and refrigeration speed of the refrigerator system. At present, the freezer compartment of the above refrigerator is mostly cooled by a multi-heat exchange layer evaporator. The drawer of the freezer compartment is located between the layers of the heat exchange layer of the evaporator. The structure of the evaporator is divided into steel wire coils. There are two types of structures: tube type and aluminum plate coil type. There are five types of evaporators commonly used in refrigerators: finned coil type, aluminum plate inflation type, steel wire coil type, and single-ridge finned tube type.
1. The evaporator of the direct-cooling refrigerator is located in the back wall of the freezer compartment and the refrigerator compartment. The exposed pipes of the freezer compartment are, and some are metal plates.
2. There will also be evaporators on both sides of the refrigerator, and there will generally be an aluminum plate below the evaporator.
3. The evaporator of the air-cooled refrigerator is integrated, and the cold temperature is blown into the freezer compartment and the refrigerator compartment of the refrigerator through the fan.
1. The evaporator of the direct-cooling refrigerator is located in the back wall of the freezer compartment and the refrigerator compartment. The exposed pipes of the freezer compartment are, and some are metal plates. 2. There will also be evaporators on both sides of the refrigerator, and there will generally be an aluminum plate below the evaporator. 3. The evaporator of the air-cooled refrigerator is integrated, and the cold temperature is blown into the freezer compartment and the refrigerator compartment of the refrigerator through the fan. 4. All in all, the evaporator of the refrigerator is an indispensable structural component for the refrigerator. If the evaporator of the refrigerator fails at ordinary times, the phenomenon of water flowing in the refrigerator will occur.
