Who knows how the floor heating will be heated
A: Coal-fired boiler heating, whether it is floor heating, or radiators, its cost is relatively high, coal itself belongs to the type, and after heating with coal boiling water, and then pressurized through the pipeline, the water flows to the required heating area, through radiators or water floor heating and other conductors, heating indoor air. Relatively speaking, boiler water floor heating is less expensive than radiator operation, and floor heating will have a better heating effect than radiator heating, and the cost is slightly lower. The disadvantage of boiler heating is also that the heating effect is slow, if according to the heating area of 200 square meters, the water volume needs about 1 ton of water, only each time the boiler first needs to heat 1 ton of cold water, and this part of the coal energy consumption is basically wasted, and electric floor heating can be quickly heated up in 0.001 seconds. For example, in the same 200㎡ house, electric floor heating needs 3 to reach the indoor temperature, while the boiler takes 25 times to reach the indoor temperature, and this part of the energy consumption loss is basically wasted (because the water needs to be heated before each heating). Second, in addition to intelligent control, electric floor heating can also save space, as you just mentioned
