+8613456528940

Ceramic heating plate heating material

Nov 24, 2021

Ceramic heating plate heating material

Ceramic heating plate is a device that uses electric heating alloy wire as heating material, uses mica soft plate as insulation material, and is covered with thin metal plates (aluminum plates, stainless steel plates, etc.) for heating. Typical applications such as electric thermos. The metal tubular electric heating element is cast in the aluminum plate, aluminum plate or welded or embedded on the aluminum plate or aluminum plate to form various shapes of electric heating plates and electric heating. Typical applications include electric rice cookers, electric irons, and electric coffee pots. Electric heating plates have been widely used in various fields such as industry, agriculture, civil, national defense, science and technology, medical and health, etc. The heating material is electric heating alloy wire, and its working principle is very simple, which is the basic electric heating effect. When the ceramic heating plate is working, the electric current passes through the electric heating alloy wire, and the electric heating alloy wire will generate heat, convert the electric energy into heat energy, and conduct it to the outer shell. The electric heating plate is designed with insulating materials to ensure that the electric current is not Will cause safety hazards to users.


Ceramic heater manufacturers


Pay attention to the following points in the process of using far-infrared ceramic heater:

Ceramic heater

1. The silicone electric heating device can work and be pressed, that is, the auxiliary pressure plate is used to make it close to the heated surface. At this time, the electric heating plate has good heat conduction, and when the temperature of the working area does not exceed 240 ℃, its power density can reach 3W/cm2.

2. In the case of dry burning in the air, the power density of the electric heating plate should be less than 1W/cm2 due to the temperature resistance of the material; in the non-continuous working condition, the power density can reach 1.4W/cm2.

3. The working voltage of the ceramic heating plate is selected based on the principle of high power-high voltage, low power-low voltage, and special needs can be listed.

4. The working temperature for continuous use should be less than 240℃, and no more than 300℃ instantaneously.


Send Inquiry