Since the mesh belt conveyor is installed by itself and not installed in accordance with the regulations, various problems will appear during operation due to installation errors. If the mesh belt conveyor does not work properly, it needs to be solved to make it normal Work. If the mesh belt conveyor is not corrected, the machine will be damaged, the machine will be damaged to a greater extent, and the maintenance and repair costs will be greater. Therefore, timely correction of problems is conducive to the operation of the machine.
First, there is a problem: the mesh belt conveyor, the mesh belt conveyor drive motor is burned out, what should we do, and what are the reasons and treatment methods?
Reason: There are hard blocks or small pieces of iron mixed in the conveying material, the cutter is stuck, the current increases sharply, and the motor is burned; if the incoming material is too large, the motor is overloaded and the motor heats up and burns.
Treatment: (1) Prevent small iron pieces from entering; (2) Keep a certain gap between the reamer and the casing; (3) Feed the material evenly; (4) Send out the materials before stopping the machine.
Second, the problem that arises: What should I do if the casing of the mesh belt conveyor shakes intermittently or continuously? What causes it, and how to deal with it?
Reason: The center lines of the spiral sections are not concentric during installation. Wipe the shell eccentrically during operation to make the shell shake.
Treatment: align the center line when reinstalling.
Third, the problem that arises: What should I do if the temperature rise of the suspension bearing of the mesh belt conveyor is too high?
Reason: Improper installation; hard and large objects mixed into the machine to cause abnormal friction of the connecting shaft.
Treatment: (1) Clean up foreign objects and test run until normal (2) Adjust the position of the suspension bearing.
Fourth, the problem that arises: what is the matter with the overflow of the mesh belt conveyor?
Reason: The material has high moisture content, which is concentrated on the spiral hoist bearing and gradually thickens, making it difficult for incoming materials to pass through; the sundries in the material make the spiral hoist bearing block up; the transmission device fails and is not found in time.
Treatment: (1) Shut down to remove the debris in the machine; (2) Strengthen the drying of raw materials; (3) Shut down and repair the transmission device.
The above four points are the prone phenomenon of the mesh belt conveyor, and it is also the place where you usually do not pay attention to the operation error. The simple arrangement hopes to help you, and we will continue to organize and collect later, which can convey the mesh belt. The reasons for the malfunction of the machine can be found and corrected in time.
For more information about mesh belts, you can directly consult the company's website or the contacts on the website. They are all these professionals who are very professional and will be very enthusiastic to solve various problems such as mesh belts for everyone. Welcome to inquire or order this product.
