Description

Refrigeration Aluminum Foil Heater put PVC heating cable between the two pieces of foil or hot melt on the single-layer aluminum foil.

Commodity name: Aluminum foil heating sheet

The outer diameter of the heating wire is 2.5m

Diameter of heating plate: 75CM

Size, shape power can be customized

Insulation layer material: silicone rubber, temperature resistance 200 ℃

Power: 220V 450W

Power per meter: less than 50W/m

Working temperature: 70℃～120℃

Water immersion withstand voltage: 1.5KV～4.0KV/1min

State insulation resistance: ≥200MΩ

Leakage current: ≤0.12mA

Product introduction:

The aluminum foil composite electric heating wire assembly is a kind of sheet heating element in which the heating wire is welded on a single aluminum foil or sandwiched between two aluminum foils. The back is covered with double-sided tape, which can be easily and securely attached to the heated surface. The thickness of the product is only 3 to 5mm, the area is from 10 cm2 to 1.0 square meters, the working power is from 0.5 watts to several hundred watts, and the working temperature is up to 150 ℃. It has special advantages such as lightweight, simple design and installation, hygienic use, uniform surface heat transfer, long service life, low price, random and convenient design according to the shape of the heated surface, etc. The ideal heating element is widely used in refrigerator freezer compensation heating, advertising moisture-proof and defogging, medicine and food processing, planting and breeding insulation, and other fields.

Technical Features:

1. It is suitable for surface heating on various low-temperature occasions. It can be easily made into various shapes according to the heating surface, with convenient design and low price.

2. Easy to install, hygienic to use, and even heat transfer on the surface.

3. The power can be partitioned and can be equipped with a thermostat.

4. Waterproof and moisture-proof, long life.

5. Meet explosion-proof requirements.

Application:

1. Refrigerator and freezer for compensation heating.

2. It is an ideal heating element for the design of medium and low-temperature surface heating and thermal insulation applications, and is widely used in agricultural, industrial and commercial machines, equipment, and devices, such as dryers, incubators, thermal insulation rooms, advertising defogging heaters, etc.

Performance:

1. Power density: PS resistant PVC heating wire: ≤8W/m.

105℃ PVC heating wire: ≤12 W/m.

Specification

		RLPV
Electrical insulation		105℃PVC
Dimension		Any dimension on request
Voltage		Any voltage on request
Output		Up to 2.5KW/m²
Tolerances		≤±5% on resistance
Insulation resistance in normal temperature		≥100 MΩ
Dielectric strength in normal temperature		1800V 2S, No flashover and break down
Leakage current in working temperature		≤0.02 mA/m
Connect strength	Heater wire and lead wire	≥36N 1min
	Lead wire and terminal	≥58.8N 1min
	Heater and Al-foil	400g/ 1min