Description

Hot runner heater and Hot Runner Nozzle Heater are made of nickel chrome resistance wire placed inside chrome nickel steel tube filled with MgO power and compacted for faster and efficient heat transfer. The heaters are anneale to acquire malleability for bending into any shape. Hot runner heaters with built in thermocouple are also avaiable. Hot runner bushes are produced with hot runner heaters of different cross section with inner brass and outer stainless steel cover.

Specificatioin

Sheath Material	Cr Ni-Steel
Insulation Material	MgO
Resistance Wire	Ni Cr 80-20
Maximum Sheath Temperature	700°C
Die Electrical Strength	800V A/C
Insulation	>5 M W
Thermocouple	J type (Standard) or K type
Length Tolerance (Straight)	5%
Wattage Tolerance	+/- 10% (+/- 5% Available Upon Request)
Resistance Tolerance	+/- 10% (+/- 5% Available Upon Request)
Unheated Length	35mm (Standard)
Dimensional Tolerance	Coil I.D +/- 0.1 to 0.2mm
Dimensional Tolerance	Coil Length +/- 1mm

When you order hot rummer nozzle heater, please let us know below dimensions, also please let us know if you have other requirements.

Needs to tell us the inner diameter, outer diameter, length of the heater you need, whether you need a thermocouple, whether the thermocouple is J-type or K-type, heater lead length, our standard does not heat The length is 40mm, if you have special requirements, you need to tell us when placing an order, thank you!

Structure

Hot runner heater are made of nickel chrome resistance wire placed inside chrome nickel steel tube filled with MgO power and compacted for faster and efficient heat transfer. The heaters are anneale to acquire malleability for bending into any shape. Hot runner heaters with built in thermocouple are also avaiable. Hot runner bushes are produced with hot runner heaters of different cross section with inner brass and outer stainless steel cover.

Our Other Production Pictures