+8613456528940

Analysis And Solution Analysis And Solution For Leakage Of Heating Tube

Apr 04, 2021

The heating tube has a simple structure, high thermal efficiency, good mechanical strength, and has good adaptability to harsh environments. It can be used in the heating of various liquids and acid-base salts, and also adapts to a low-dissolving metal heating dissolution.

Heating tube leakage reasons are mainly classified:

1. Not connected;

2. Electric heating pipe insulation damage (this may be the problem of insulating magnesium oxide powder, or joint insulation problem);

3. Electric heating tube burn is shorted and the cup is shorted;

4. Improper cleaning, water hits the wiring column of stainless steel electric heating pipe;

5. The circuit leads fall off with the cup;

6. Electric thermal socket or power plug dirt is too much;

7. The water quality is too poor, and the water is severe;


It can be referred to:

1. Pick up the ground line as required and check if it is correct;

2. Check the repair, if there is still such an event recommendation;

3. The electric heating tube has been damaged to replace the same size electric heating pipe;

4. Correct cleaning and dry treatment of stainless steel heating tube;

5. Check the shed lead, re-weld;

6. Clean and dry treatment correctly


Send Inquiry