+8613456528940

What output power should be paid attention to when choosing PTC heater?

Nov 14, 2022


The greater the output power of the PTC heater, the faster the heating speed. PTC electric heater motor: electric heating (PTC electric heater, electric heating furnace, etc.). The large amount of applied current is indirectly independent of power, voltage, difference, power factor (also known as power). RF coaxial continuous use has the advantages of no radiation safety and good vibration resistance. PTC heaters are energy efficient because their output power drops significantly as the temperature of the situation increases. When the air volume is unchanged, the power of the PTC heater will be inevitably low, which inevitably plays a role in the benefit of automatic power regulation. On the other hand, the lower the room temperature. No resistance and no power consumption. When the circuit is abnormal, the current is too large or the circuit is short-circuited, the power supply can be quickly cut off to protect the circuit and other components.

The reliability, application life and explosion-proof function of electrical equipment of electric heater products, as well as the additional requirements of the electric heater door cable conduction device installed in the control box, should be matched with the electric power transmission protection device. Lubrication systemThe lubricating oil system is composed of lubricating oil tank, main oil pump, auxiliary oil pump, oil cooler, oil filter, high oil tank, valve, pipeline, etc. High temperature electric fan lubricating oil tank is a kind of equipment for supplying, procuring, settling and accumulating lubricating oil. There is a heater inside, which is heated and heated before start-up to ensure that the lubricating oil temperature rises to 35~45 °C at start-up to meet the needs of the unit starting and running.


NC is bayonet type and is mostly used for RF persistence below 4GHz. Liquid explosion-proof electric heater explosion-proof electric heater auxiliary electric heater features: small size, high power: the heater should use the cluster tube electric heating element. The temperature response is fast, the temperature control accuracy is high, and the summary thermal obedience is high. High temperature heating: The water heater is planned to have a high operating temperature of up to 850°C.


The characteristics and critical parameters of PTC heater manufacturers' safety tubes The rated current refers to the larger working voltage that can be subjected to after the safety tube is broken. The operating voltage experienced on both sides of the fuse is well below its current rating at the time of access. There are many types of fuses. The common fuse bonds can be divided into three categories: glass tube fuses with low discriminant talent, ceramic tube fuses with high discriminant gas and polymer material self-resettable fuses made of PPTC plastic polymer. Electric heaters do not need temperature feedback from humidity sensors such as professional thermostats and thermal resistancePlatinum thermal resistance, and their temperature treatment depends on its own raw material characteristics, so the product is much higher than other products. When applying safety tubes, the ordinary delineated rated current should exceed the reasonable operating voltage of the power supply circuit. Rated voltage The rated voltage is a large amount of current generated during the permanent operation of the safety tube. Assuming that the connection current is Ir, the rated voltage of the fuse tube should be the reduction rate of the differential specification fuse. The higher the operating temperature, the hotter the fuse tube is working and the shorter the application life. The important point here is that the gas temperature around the safety tube should not be mixed with the room temperature. PTC ceramic heaters save old costs and have a long application life.


Send Inquiry