+8613456528940

What kinds of heating plates are there, and what is the maximum heating temperature?

May 20, 2021

Resistance heating

The Joule effect of current is used to convert electrical energy into thermal energy to heat objects. [1] Usually divided into direct resistance heating and indirect resistance heating. The power supply voltage of the former is directly applied to the object to be heated. When current flows, the object itself is heated. The ironing machine is heated.

It will have a fever. The object that can be directly resistance heated must be a conductor, but it must have a higher resistivity. Since the heat is generated by the heated object itself, it belongs to internal heating, and the thermal efficiency is very high. Indirect resistance heating requires special alloy materials or non-metallic materials to make heating elements. The heating elements generate heat, which is transmitted to the object to be heated by means of radiation, convection and conduction. Since the heated object and the heating element are divided into two parts, the type of the heated object is generally not limited, and the operation is simple.

The materials used for the heating elements of indirect resistance heating generally require high resistivity, low temperature coefficient of resistance, small deformation at high temperatures and not easy to embrittlement. Commonly used are metal materials such as iron-aluminum alloy, nickel-chromium alloy and non-metallic materials such as silicon carbide and molybdenum disilicide. The maximum working temperature of metal heating elements can reach 1000~1500℃ according to the type of material; the highest working temperature of non-metal heating components can reach 1500~1700℃. The latter is easy to install and can be replaced by the heating furnace, but it needs a voltage regulating device when it works, and its life is shorter than that of alloy heating elements. It is generally used in high temperature furnaces, places where the temperature exceeds the allowable maximum working temperature of metal heating elements and some special occasions.


Induction heating

The conductor itself is heated by the thermal effect formed by the induction current (eddy current) generated by the conductor in the alternating electromagnetic field. According to different heating process requirements, the frequency of the AC power supply used in induction heating includes power frequency (50-60 Hz), intermediate frequency (60-10000 Hz) and high-frequency (higher than 10000 Hz). The power frequency power supply is usually the AC power supply used in industry. The power frequency of most countries in the world is 50 Hz. The voltage applied to the induction device by the industrial frequency power supply for induction heating must be adjustable. According to the power of the heating equipment and the capacity of the power supply network, a high-voltage power supply (6-10 kV) can be used to supply power through a transformer; the heating equipment can also be directly connected to a 380-volt low-voltage power grid.

Intermediate frequency power supplies have used intermediate frequency generator sets for a long time. It consists of an intermediate frequency generator and a drive asynchronous motor. The output power of this unit is generally in the range of 50 to 1000 kilowatts. With the development of power electronics technology, thyristor inverter intermediate frequency power supplies are now used. This intermediate frequency power supply uses a thyristor to first convert the power frequency alternating current into a direct current, and then convert the direct current into an alternating current of the required frequency. Due to the small size, light weight, noiseless and reliable operation of this kind of variable frequency equipment, it has gradually replaced intermediate frequency generator sets.

High-frequency power supplies usually use a transformer to increase the three-phase 380 volt voltage to a high voltage of about 20,000 volts, and then use a thyristor or high-voltage silicon rectifier to rectify the power frequency AC to DC, and then use an electronic oscillator The direct current is transformed into a high-frequency, high-voltage alternating current. The output power of high frequency power supply equipment ranges from tens of kilowatts to hundreds of kilowatts.

The object heated by induction must be a conductor. When a high-frequency alternating current passes through a conductor, the conductor produces a skin effect, that is, the current density on the surface of the conductor is large, and the current density in the center of the conductor is small.

Induction heating can uniformly heat the object as a whole and surface heating; it can smelt metal; at high frequency, it can change the shape of the heating coil (also known as the inductor), and it can also perform arbitrary local heating.


Arc heating

Use the high temperature generated by the arc to heat the object. Arc is the phenomenon of gas discharge between two electrodes. The voltage of the arc is not high but the current is large. Its strong current is maintained by a large number of ions evaporated on the electrode, so the arc is easily affected by the surrounding magnetic field. When an arc is formed between the electrodes, the temperature of the arc column can reach 3000-6000K, which is suitable for high-temperature smelting of metals.

There are two types of arc heating, direct and indirect arc heating. The arc current of direct arc heating passes directly through the object to be heated, and the object to be heated must be an electrode or medium of the arc. The arc current of indirect arc heating does not pass through the object to be heated, and is mainly heated by the heat radiated by the arc. The characteristics of arc heating are: high arc temperature, concentrated energy, and the surface power of the molten pool of the steel-making electric arc furnace can reach 560-1200 kilowatts per square meter. However, the arc noise is large, and its volt-ampere characteristics are negative resistance characteristics (descent characteristics). In order to maintain the stability of the arc during arc heating, the instantaneous value of the circuit voltage is greater than the arc voltage value when the arc current instantaneously crosses zero, and to limit the short-circuit current, a certain value resistor must be connected in series in the power circuit.


Electron beam heating

The surface of the object is bombarded by electrons moving at a high speed under the action of an electric field to heat it. The main component for electron beam heating is the electron beam generator, also known as the electron gun. The electron gun is mainly composed of a cathode, a focusing electrode, an anode, an electromagnetic lens and a deflection coil. The anode is grounded, and the cathode is connected to the negative high position. The focused beam is usually at the same potential as the cathode, and an accelerating electric field is formed between the cathode and the anode. The electrons emitted by the cathode are accelerated to a high speed under the action of an accelerating electric field, focused by an electromagnetic lens, and then controlled by a deflection coil, so that the electron beam is directed toward the object to be heated in a certain direction.

The advantages of electron beam heating are: ①Control the current value Ie of the electron beam, which can easily and quickly change the heating power; ②The electromagnetic lens can be used to freely change the heated part or freely adjust the area of the electron beam bombardment part; ③Can Increase the power density so that the material at the bombarded point will evaporate instantly.


Infrared heating

Use infrared radiation to radiate an object. After the object absorbs infrared, it converts the radiant energy into heat and is heated.

Infrared is an electromagnetic wave. In the solar spectrum, outside the red end of visible light, it is an invisible radiant energy. In the electromagnetic spectrum, the wavelength range of infrared is between 0.75 and 1000 microns, and the frequency range is between 3×10 and 4×10 Hz. In industrial applications, the infrared spectrum is often divided into several bands: 0.75 ~ 3.0 microns is the near infrared region; 3.0 ~ 6.0 microns is the mid-infrared region; 6.0 ~ 15.0 microns is the far infrared region; 15.0 ~ 1000 microns is the extreme far infrared Area. Different objects have different ability to absorb infrared light. Even the same object has different ability to absorb infrared light of different wavelengths. Therefore, in the application of infrared heating, a suitable infrared radiation source must be selected according to the type of object to be heated, so that the radiation energy is concentrated within the absorption wavelength range of the object to be heated, in order to obtain a good heating effect.

Electric infrared heating is actually a special form of resistance heating, which uses materials such as tungsten, iron-nickel or nickel-chromium alloy as a radiator to make a radiation source. After being energized, it generates heat radiation due to heat generated by its resistance. Commonly used electric infrared heating radiation sources are lamp type (reflective type), tube type (quartz tube type) and plate type (flat type). The lamp type is an infrared bulb, which uses a tungsten wire as the radiator, which is sealed in a glass shell filled with inert gas, just like a general lighting bulb. The radiator generates heat after being energized (the temperature is lower than that of general lighting bulbs), which emits a large amount of infrared rays with a wavelength of about 1.2 microns. If the inner wall of the glass shell is coated with a reflective layer, infrared rays can be concentrated in one direction, so the lamp-type infrared radiation source is also called a reflective infrared radiator. The tube of the tube-type infrared radiation source is made of quartz glass with a tungsten wire in the middle, so it is also called a quartz tube-type infrared radiator. The wavelength of the infrared light emitted by the lamp type and the tube type is in the range of 0.7 to 3 microns, and the working temperature is relatively low. It is generally used for heating, baking, drying in the light and textile industries and infrared physiotherapy in medical treatment. The radiation surface of the plate-type infrared radiation source is a flat surface composed of a flat resistive plate. The front of the resistive plate is coated with a material with a large reflection coefficient, and the reverse side is coated with a material with a low reflection coefficient, so most of the heat energy is radiated from the front. The working temperature of the plate type can reach above 1000 ℃, and it can be used for the annealing of the welds of steel materials and large-diameter pipes and containers.

Because infrared has strong penetrating ability, it is easy to be absorbed by objects, and once absorbed by objects, it is immediately converted into heat energy; the energy loss before and after infrared heating is small, the temperature is easy to control, and the heating quality is high. Therefore, the application of infrared heating is developing rapidly.


Medium heating

Use a high-frequency electric field to heat the insulating material. The main heating object is dielectric. When the dielectric is placed in an alternating electric field, it will be repeatedly polarized (under the action of the electric field, an equal amount of charge of opposite polarity appears on the surface or inside of the dielectric), thereby converting the electric energy in the electric field into heat.

The frequency of the electric field used for medium heating is very high. In the medium, short wave and ultra-short wave bands, the frequency is hundreds of kilohertz to 300 MHz, which is called high-frequency dielectric heating. If it is higher than 300 MHz and reaches the microwave band, it is called microwave dielectric heating. Usually high-frequency dielectric heating is carried out in the electric field between the two plates; while microwave dielectric heating is carried out under the radiation field of waveguide, resonant cavity or microwave antenna.

When the dielectric is heated in a high-frequency electric field, the electric power drawn in its unit volume is P=0.566fEεrtgδ×10 (W/cm)

If expressed in heat, it is:

H=1.33fEεrtgδ×10 (cal/sec·cm)

Where f is the frequency of the high-frequency electric field, εr is the relative permittivity of the dielectric, δ is the dielectric loss angle, and E is the electric field strength. It can be seen from the formula that the electric power drawn by the dielectric from the high-frequency electric field is proportional to the square of the electric field strength E, the frequency f of the electric field, and the loss angle δ of the dielectric. E and f are determined by the applied electric field, and εr depends on the nature of the dielectric itself. Therefore, the object of medium heating is mainly the material with large medium loss.

Medium heating because heat is generated inside the dielectric (object to be heated), compared with other external heating, the heating speed is fast, the thermal efficiency is high, and the heating is uniform.

Media heating can heat thermal gel in industry, dry grain, paper, wood, and other fibrous materials; it can also preheat plastic before molding, and bond rubber vulcanization and wood, plastic, etc. Choosing an appropriate electric field frequency and device can heat only the adhesive glue when heating the plywood without affecting the plywood itself. For homogeneous materials, heating can be carried out as a whole.


Send Inquiry