+8613456528940

What is the most significant feature of PTC type ceramic heater?

Nov 11, 2021

PTC type ceramic heater application note


1. The PTC heating film has the characteristics of automatic constant temperature, no temperature control system is required, and the PTC heating film can be directly energized.


2. When the PTC heating film is used to heat liquid (such as water), the PTC heating film will not be damaged after the liquid is dried.


3. If the PTC heating film is used to heat the cold air, the PTC heating film will not be damaged when the air is not supplied.

4. The service life is long, and the service life can reach more than 10 years when used in a normal environment.


5. Reliable work, using the internal characteristics of the PTC heater to control the temperature, and never over-temperature.


6. The working voltage is very wide: when the working voltage changes twice, the change of the surface temperature is very small.


7. When multiple PTC heaters are used together, they should be connected in parallel, not in series.


The PTC type ceramic heater is composed of PTC ceramic heating element and corrugated aluminum strip through high temperature bonding. This type of PTC heater has the advantages of low thermal resistance and high heat exchange efficiency. It is an electric heater with automatic constant temperature and power saving. One of its outstanding features lies in its safety performance. Under any application conditions, the appearance of "redness" of electric heating tube heaters will not occur, which may cause burns, fires and other safety hazards.


The most notable features are:


1. PTC type ceramic heater saves costs and has a short life.

There is no need for special thermostats and thermal resistance thermocouples and other temperature sensors to stop the temperature response and stop heating control of the heater. Its temperature adjustment is based on its own data characteristics, so that the product has a service life that is much longer than other heaters. .


2. The PTC ceramic heater is safe and environmentally friendly.

The heater body is designed to have multiple levels of heating temperature below 200 degrees Celsius, which can be

The body is not red and has a maintenance isolation layer, and any application site does not require asbestos and other heat insulation materials to enter

It can be used for cooling treatment, and it can be used with confidence that there is no problem of burns to the human body and fire.


3. PTC type ceramic heater saves electric energy.

Compared with electric heating tubes and resistance wire heating products, this product relies on the characteristics of the material itself and adjusts its own thermal power output according to the change of the ambient temperature, so it can optimize the heater's electrical energy consumption to a minimum, and at the same time, it is a material with high heating efficiency. The application efficiency of electric energy is also greatly improved.

?Rapid heating, automatic temperature control in case of fan failure, long service life

? Wide voltage application range, can be designed according to requirements between 12V-380V

? Convenient design, can be designed arbitrarily from low power to high power, and the shape can also be designed on request

? Does not extinguish, safe and reliable, no redness and no open flame when PTC is hot

In small and medium-power heating places, PTC heating has the advantages of constant temperature heating, no open flame, high heat conversion rate, minimal influence of the power supply voltage, and long natural life. The traditional heating components cannot be compared. To the favorite of R&D engineers.


Send Inquiry