Carbon crystal electric heating plate is a heating material made of carbon crystal particles and polymer resin materials by a special process after being modified by carbon fiber and then ball-milled. The heating principle is that under the action of the electric field, the carbon molecules in the heating body produce "Brownian motion", and the violent collision and friction between the carbon molecules generate heat energy, and transfer heat in the form of far-infrared radiation. The conversion rate is over 98%. Within tens of seconds of electrification, the surface temperature of the carbon crystal electric heating plate rises rapidly from the ambient temperature, and conducts conduction heating to the outside at a constant temperature. This product has the characteristics of high efficiency, energy saving, economy, no pollution, long life and temperature control, and the use cost is only about half of ordinary electric heating.
As a modified and purified carbon crystal particle heating product, the carbon crystal heating plate is greatly improved compared with ordinary heating products in terms of heating uniformity, fire resistance, safety, weather resistance, electrothermal conversion efficiency and infrared emissivity. and improve. The carbon crystal low temperature radiant heating system makes full use of the excellent plane heating characteristics of the carbon crystal electric heating plate. During heating, the entire plane heats up synchronously, continuously heating, and the heat balance effect of the wall is better than other heating methods such as plumbing, air conditioning, heating cables, etc. It has the following advantages:
First, comfort. Carbon crystal low temperature radiation heating system is a product with far infrared low temperature radiation as the main energy transmission method. The test proves that the human body is in a low temperature radiation environment, just like being placed in the sun, the real temperature of the human body is 2-3 ℃ higher than the indoor air temperature, thereby improving the comfort of the living environment. At the same time, under the condition of low temperature radiation, the convection speed of indoor air is greatly reduced, so that the indoor dust is reduced, there is no noise, there are no cold spots and hot spots in the room, and the temperature is balanced, making people feel no dryness, and the temperature is soft like the sun.
Second, economy. The product heats up quickly and heats up quickly: it can be heated for 5 minutes after power-on, and the carbon crystal electric hot plate directly radiates heat to the room, and the temperature rises more than 5 times faster than traditional plumbing and heating cables; due to the realization of household and room heating, it can be Adjust the temperature of each room at will according to the temperature and needs, which can also save operating costs. In a heating season, the national standard residential use cost of a building area of 100 square meters does not exceed 2,000 yuan, and the daily operating cost is one-third of the air conditioner, water heating and heating. It is a real affordable and affordable new heating product with less than half of the cable; it has high thermal efficiency and is currently the product with the highest electric-heat conversion rate, with a conversion rate of up to 98%; high system efficiency, when the room temperature is set to 16 When the temperature is 18°C, the heating effect can be achieved at 18°C, and 5% of energy can be saved for every one degree decrease in room temperature.
Third, it is safe, reliable and has a long service life. The production of carbon crystal electric heating plates complies with the GB/T 4654-2008 standard, and has passed the inspection of the National Infrared and Industrial Electric Heating Products Quality Supervision and Inspection Center, as well as the relevant "General Safety Requirements for Household and Similar Electrical Appliances" GB4706.1-2005, "Household Special requirements for safe indoor heaters for electrical appliances and similar purposes" GB4706.23-2007 standard inspection. The product has high insulation strength, flame retardant, waterproof, moisture-proof, corrosion-resistant, maintenance-free, and has a service life of more than 100,000 hours.
