1. Copper core wire: 7×0.50, 19×0.32, 19×0.41
2. Conductive plastic layer: ordinary PTC, flame retardant PTC, fluorine-containing PTC
Series electrotropics
Series electrotropics
3. Insulating layer: modified polyolefin, flame retardant polyolefin, fluoropolyolefin, perfluorinated materials
4. Shielding layer: tinned soft round copper wire, covering density 80%
5. Sheath layer: modified polyolefin, flame retardant polyolefin, fluoropolyolefin, perfluorinated material
3. Construction temperature: minimum: -5°C
4. Thermal stability: After 300 cycles from 15 °C to 99 °C, the heat of the cable is maintained at more than 90%.
5. Bending radius: 25.4mm at room temperature at 20°C -35.0mm at low temperature
6. Insulation resistance: when the cable length is 100m and the ambient temperature is 75°C, shake the meter with 2,500VDC for 1 minute, and the insulation resistance (between the wire and the shield) The minimum value is 120MΩ.
7. Starting current (10°C) 0.4A per meter
8. Please refer to some precautions for installation and use
9. Maximum use length: no more than 100 meters
