The most notable features of PTC heaters are:
1. Save cost and long life. It does not need special temperature controllers and temperature sensors such as thermal resistance thermocouples to perform temperature feedback to control the heating of the heater. Its temperature adjustment is based on its own material characteristics, so that this product has far greater use than other heaters. life.
2. Safe and environmentally friendly. The heater body is designed with multiple levels of heating temperature below 200 degrees Celsius. In any case, the body is not red and has a protective isolation layer. Any application does not require heat insulation materials such as asbestos to cool down. It can be used with confidence. Human burns and fire problems.
3. Save energy. Comparing electric heating tube and resistance wire heating products, this product relies on the characteristics of the material itself and adjusts its own thermal power output according to the change of the ambient temperature, so it can optimize the heater's power consumption to a minimum, and at the same time, it is a material with high heating efficiency. It also greatly improves the utilization efficiency of electric energy.
·Rapid temperature rise, automatic temperature control even in case of fan failure, long service life
·Wide voltage application range, can be designed according to needs between 12V-380V
·Convenient design, can be designed arbitrarily from low power to high power, and the shape can also be designed according to requirements
·No burning, safe and reliable, no redness and no open flame when PTC heats up
Plastic-encapsulated thermal protector for ptc electric heater, plastic-encapsulated thermal protector for water pump motor is a kind of bimetallic sheet after a fixed temperature as a heat-sensitive reaction element. When the heat generated by the electric appliance reaches a predetermined temperature value, it will act quickly to make the contact Disconnect and cut off the circuit. When the temperature drops to the preset reset setting value, the bimetallic strip will quickly recover to close the contacts and connect the circuit. The thermal protector has a small volume, an insulated shell (PBT high temperature engineering plastic), and a sealed Features such as good performance and flexible installation.