Under any application conditions, there will be no "redness" on the surface of electric heating tube heaters, which may cause burns, fires and other safety hazards. PTC heaters have the advantages of constant temperature heating, no open flame (no redness), high heat conversion rate, minimal influence on the power supply voltage, long natural life and other ancient heating components that cannot be compared. The application of electric heaters in the center is increasingly met R & D engineer porridge.
The PTC heater has the characteristics of high withstand voltage, small balance current, low power consumption, good flame retardant function, short response time, and long application life. Therefore, the PTC heating chip is the heat source, and the corrugated sheet made of aluminum alloy is used as the heat sink. , The heater is formed by high temperature, bonding, brazing and molding. Long application life (can be used continuously for more than 10 years), energy saving, no open flame (no redness when heating), no oxygen consumption, high safety function, automatic heat adjustment and a series of other ancient electric heating The role of devices that cannot be compared.
Application of long life, energy saving, no open flame, no oxygen consumption, high safety function, easy to adjust the heat generation and less affected by power supply voltage fluctuations, a series of other ancient electric heating devices can not be compared.
When the PTC heating element is used to heat the liquid (such as water), after the liquid is dried, the PTC heating element will not be damaged, and it has the constant electric heating consolidation. , Does not consume oxygen, the wind is gentle, not rigid, safe and stable, and it has a long application life in a flat environment.
(1) PTC ceramic heater based on heat conduction. Its characteristic is to pass through the electrode plate (electricity and heat transfer) of the ptc heating element surface device Thermal conductive glue) and other multi-layer heat transfer structure to transfer the heat emitted by the ptc element to the heated object.
(2) All kinds of PTC ceramic hot air heaters that use the formed hot air to stop convective heat transfer. Its characteristics are large output power, and can automatically adjust the blowing wind and output heat.
(3) Infrared radiant heater. The characteristics of the actual application of the rapid heat from the surface of the PTC element or the heat-conducting plate directly or indirectly triggers the far-infrared paint or far-infrared material that touches the surface to radiate infrared rays, which constitutes PTC ceramics Infrared radiant heater.