Silicone electric heating pads are often used to heat in metal. In life, they are used to quickly bake food, cook in rice cookers, etc.; in production, they are used in the bottom of livestock farm drinking troughs and oil barrels. Heating, flat vulcanizing machine and other rubber machinery and plastic equipment are used.
1. There are three forms of electric heating plate when it is used to heat metal:
1. The heating tube is directly cast or die-cast in the metal alloy;
Electric heating film.jpg
2. The heating tube is heated in contact with the metal surface. For example, a flat heating tube is closely attached to the outer wall of a square or spherical metal container for heating;
3. Punch holes in molds, castings and industrial machinery and equipment to insert electric heating tubes into the holes to heat, such as bag-making electromechanical heating tubes.
2. Surface load and surface temperature of heating plate for common castings:
1. The surface load of the cast aluminum heating plate: 0.1~5w/cm2, the surface temperature is below 380℃, and the temperature of 400℃ or higher will cause the heating plate to deform and even melt;
2. Surface load of cast iron heating plate, cast aluminum heating plate: 0.1~5w/cm2, the surface temperature is about 700℃;
3. The surface load of the cast aluminum heating plate: 0.1~5w/cm2, the surface temperature is about 600℃, and the temperature resistance is 800℃.
3. The relationship between the surface load of the heating plate and the surface temperature:
The electric heating tube is cast in a copper alloy to make a cast copper heating plate. After different surface load tests, the following results are obtained:
1. Surface load: when 1w/cm2, surface temperature: about 200℃
2. Surface load: when 2w/cm2, surface temperature: about 330℃
3. Surface load: when 3w/cm2, surface temperature: about 415℃
4. Surface load: when 4w/cm2, surface temperature: about 485℃
5. Surface load: when 5w/cm2, surface temperature: about 550℃
In the test, when the surface temperature of the electric heating plate reaches 500 degrees, the thermal state inside the electric heating tube placed in the metal is equivalent to that of the electric heating element in the air.
When the electric heating tube is heated in metal, you need to know the following points:
1. Both sides of the metal plate are hot;
2. After the power is turned on, the electric heating plate cannot be placed in the air for dry burning and must be attached to the heated body;
3. Use temperature control. The surface temperature of the electric heating tube when it is heated in the metal depends on the maximum allowable working temperature of the metal plate alloy material. The maximum allowable working temperature of the material constituting the electric heating tube is determined



