Functional Description of Silicone Rubber Electric Heating Belt;
SZ type silicone rubber electric heating belt
Through a special process, the aluminum alloy and silicon rubber are combined, and the imported heating wire is used inside, which has the characteristics of flat plate type and ultra-thin. This series of heaters has a good heating effect. long lasting. Moisture-proof silicone rubber and alkali-free glass fiber double insulation, so that the insulation performance of the heater is more reliable. The aluminum plate assists heat dissipation, which improves the thermal efficiency of the heater and prolongs its service life. Easy to install.
technical indicators;
Dielectric strength (wire end and surface); 2000VAC
lmin insulation resistance>100M
Service life > 30000 hours; working voltage AC220V
User customization
Appearance and installation dimensions;
Model -- power -- length -- width -- height -- surface temperature
BC-50/50W/150mm/90mm/3.5mm/70 degrees
BC-75/75W/150mm/90mm/3.5mm/70 degrees
BC-100/100W/185mm/120mm/3.5mm/70 degrees
BC-150/150W/185mm/120mm/3.5mm/70 degrees
Probe dehumidification silicone rubber electric heating belt
Instructions for use
The probe dehumidification heating wire is used to monitor the heating wire on the probe to help the probe dehumidify and make the image clearer.
characteristic
Fully waterproof design Moulded knots, extremely flexible
Double-layer insulator Silicone rubber insulator applicable range; -70℃ to +200℃
Technical indicators
Rated power: ±3%
Wire length: 50—70mm
Rated power supply: 24V
Belt tension: 30N×30S
Belt length: ±3%
Belt tension: 80N×10S
Ambient temperature: -40℃+200℃
Withstand voltage: AC3500V
Insulation resistance: ≥200MN
Leakage current: ≤0.2MA
Greenhouse silicone rubber electric heating belt
Instructions for use
Taking vegetable electrothermal seedling nursery as an example
The power of the electrothermal seedling nursery bed can be 90-120 watts per square meter under the condition of being equipped with a temperature controller, generally in the case of plastic film breeding.
Total power W = heating area * power per square meter.
The number of electric heating wires N = total power W / electric heating red power (N is an integer)
Voltage-Current-Power-Length-Maximum Temperature
220V--5--1000W-120/M-≥40℃
220V--4--800W--100/M-≥40℃
220V--3--500W--60/M--≥40℃
220V--1.1-250W-30/M--≥40℃
380V--2.8-1000W-120/M-≥40℃
Technical indicators
Withstand voltage AC2500V/Min Insulation resistance≥200Mn
Leakage current≤0.2Mn ambient temperature-40℃-+200℃
Parallel constant power silicone rubber electric heating belt
Scope of application
Floor heating of buildings, refrigerators and warehouses; ramp heating; gutters and roof defrosting;
characteristic
Strong structure, flexible and easy to bend; easy to install; combined with the overall cold tail section, no joint point.
Technical indicators
Output power 25W/m-40W/m-50W/m
Voltage -220V
Wire - 0.75 square
Wire Insulation Material - Silicone Rubber
Heating element-copper-nickel alloy wire-copper-nickel alloy wire-nickel-chromium alloy wire
Heating wire outer insulation - silicone rubber
Heating body 5mm×7mm
Use the longest limit - 65 meters - 50 meters - 44 meters
Distance between nodes -0.5 meters
Withstand voltage-AC3500V-insulation resistance≥200mn
Pipe Silicone Rubber Electric Heating Tape
Scope of application
It is mainly used in severe cold areas. The main functions of the silicone rubber electric heating belt for pipes and solar energy are the functions of heat preservation, thawing, and melting of ice and snow. Silicone rubber has the characteristics of high temperature resistance, high cold resistance and aging resistance.
characteristic
According to the needs of the heated device, it can be bent and wound at will, with a small space occupation and a simple and fast installation method. The heating body is covered with a silicone insulator, and the tin copper braid can prevent mechanical damage. It can be made according to its required length, with a cold end of the core.
Main Specifications
Length M-Power W-Length M-Power W
0.5-20--50---5---125
0.6-20--60---7---175
0.7-20--70---10--250
1.0-20--100--12--300
1.2-20--120--15--500
1.5-20--150--100-500
2.0-20--200--150-800
Technical indicators
Rated power ±3% wire length 1M
Rated power supply 220V with line tension 30N×30S
Belt body length ±3% Ring belt tension 80N×10S
Ambient temperature -40℃+200℃ Withstand voltage AC3500V
Insulation resistance≥200MN leakage current≤0.2MA
Please refer to the technical indicators for inspection by the user unit
