model
Adapt to the environment and process
Tube outer material
Unit surface load of pipe
model
Adapt to the environment and process
Fluoroplastic electric heater (CMFLON)
Suitable for strong acid and strong alkali and other corrosive liquids, process temperature ≤105℃, non-sticking, non-scaling, uniform surface heat dissipation
PFA/coat PTFE/coat
Stainless steel, titanium, iron, copper 1.5W/C㎡
Fluoroplastic electric heater (CMFLON)
Suitable for strong acid and strong alkali and other corrosive liquids, process temperature ≤105℃, non-sticking, non-scaling, uniform surface heat dissipation
Titanium (CMTi) electric heater
Suitable for chromium plating, acid copper, nickel plating, tonification, filling, oxidation tank, chromic acid anodization,
Phosphating acid tin plating and other processes
Titanium Ti
6-4.5W/C㎡
Titanium (CMTi) electric heater
It is suitable for chromium plating, acid copper, nickel plating, tonification, filling, oxidation bath, chromic acid anodization, phosphating acid tin plating and other processes
Stainless steel (CM316L) electric heater
Suitable for applications in liquids, oils and other liquids with PH>7-14
304, 316L, 1Cr18Ni9Ti
6-4.5W/C㎡
Stainless steel (CM316L) electric heater
Suitable for applications in liquids, oils and other liquids with PH>7-14
Quartz electric heater
Suitable for use in anti-corrosive liquids (except hydrofluoric acid)
quartz
1.5W/C㎡
Quartz electric heater
Suitable for use in anti-corrosive liquids (except hydrofluoric acid)
Fin type, dry burning tube and external circulation hot air riot heater
Suitable for heating in the air, casting, inserting, and making heating module components
Stainless steel, 1Cr18Ni9Ti 10# steel
1-1.2W/C㎡
Fin type, dry burning tube and external circulation hot air riot heater
Suitable for heating in the air, casting, inserting, and making heating module components
illustrate
The forms of electric heating tube are: U type, W type, I type, L type, coil type, plate type




