+8613456528940

Rapid temperature change test chamber maintenance

Dec 28, 2022

The rapid temperature change test chamber is a more accurate test equipment than the conventional test chamber, so we must ensure that there is no problem with the spare parts inside the equipment during use, otherwise it may cause equipment failure or affect the performance indicators of the equipment, so that the test cannot be carried out normally. However, there are also ways to avoid this situation as much as possible, that is, everyone needs to pay more attention to it at ordinary times.

1. Check the pressure regulator and load regulator

2. Pay attention to the hygiene of the environment of the rapid temperature change test chamber, compressor and the place where the equipment is installed.

3. The staff should pay attention to the temperature rise of the motor, the bearing temperature and the indication of the voltmeter and ammeter, the current can not exceed the rated current of the motor, and the reason must be found before continuing to use.

4. Touch to check whether the temperature of the crankcase and cross guide rail at the suction and exhaust cover is normal.

5. Carefully observe whether the oil level of the oil pool of the machine itself and the lubricating oil in the oil injector are lower than the standard line, if it is too low, it should be replenished.

6. Check whether the compressor vibrates and whether the anchor screws are loose or fall off.

7. Detect the action sound of cylinders and moving parts at all levels, "listen" to identify whether its working state is normal, if the abnormal sound response is immediately shut down, check and solve.

crank case heater 56588

Crankcase Heating Cable 5001

d2cc76140638ece0a801902dd9657c8

Send Inquiry