PTC heater performance and what are its functions?
PTC heaters have the characteristics of high withstand voltage, small residual current, low power consumption, complete flame retardancy, fast response time, long application life, etc., so PTC components are used as heat sources, and corrugated sheets made of aluminum alloy are used as heat sinks. , The exclusive sandblasting cleaning process and the heater composed of high temperature, adhesion, welding and molding are used by Zhishuo manufacturer. Long application life (can be used for more than 10 years), energy saving, no open flame (no redness during work), no oxygen consumption, high safety performance, heat generation easy to adjust, and a series of other ancient electric heating The role of devices that cannot be compared.
PTC type ceramic heater saves electric energy.
PTC heaters and ancient heaters have the same power consumption under the same power condition, but because the conversion of PTC electric energy into heat energy is higher than that of ancient heaters, more heat energy is generated, and vice versa. Under the same situation, the electric energy consumed by the ancient heater is more than that of the PTC heater, which means that the PTC ceramic heater saves electric energy.
1. The power of the PTC heater is greatly affected by the external environment. The ideal test method is to assemble it in the complete machine under standard working conditions and stop it. It is convenient for both parties to check and confirm from time to time. In actual driving, the sealed sample confirmed in the whole machine is adjusted to imitate the relevant parameters of the air duct and tested. During the test, the ambient temperature is generally maintained at 20~25℃.
2. The PTC heater has thermal compression phenomenon during work, so in the construction decision, it should be considered that there is an inevitable gap (above 5 mm) around the heater;
3. If you choose a surface-charged heater, you should also consider the safety distance to prevent electric shock and frost when the evaporator is frosted, to ensure that there is no possibility of human bodies, metal objects and frost layers. It is safer to choose a surface-insulated heater;
4. When the heater is connected to the three-phase power supply, the Y-type connection should be adopted, and the neutral point must be connected to the zero line, to prevent the disadvantages of excessively high voltage at the heater terminal due to the unbalanced three-phase.


