+8613456528940

PTC heater performance and advantages

Nov 10, 2021

PTC heating has the characteristics of high withstand voltage, low residual current, low power consumption, complete flame retardancy, fast response time, long service life and so on. It uses PTC elements as heat sources and aluminum alloy corrugated sheets as heat dissipation. The heater is made of the unique sandblasting cleaning process and the heater composed of high temperature, bonding, welding and molding by Zhishuo factory. Long service life (can be used continuously for more than 10 years), energy saving, no open flame (no redness at work), no oxygen consumption, high safety performance, heat generation easy to adjust, and a series of other traditional electric heating devices, such as being less affected by power supply voltage fluctuations Incomparable advantages.


PTC type ceramic heater saves electric energy.

PTC heaters and traditional heaters have the same power consumption under the same power condition, but because the conversion efficiency of ptc electric energy into heat energy is higher than that of traditional heaters, it generates more heat energy, and vice versa. Under the same conditions, traditional heaters consume more electricity than PTC heaters, that is, PTC ceramic heaters save electricity.


1. The power of the PTC heater is greatly affected by the external environment. The ideal test method is to stop the device in the whole machine under the standard working conditions. Usually, in order to facilitate the inspection and confirmation of both parties, in practice, the test is performed after adjusting the relevant parameters of the imitating air duct with the sealed sample confirmed in the complete machine. During the test, the ambient temperature is generally maintained at about 20~25℃.


2. The PTC heater has heat shrinkage phenomenon when it is working, so it should be considered that there is a certain gap (above 5mm) around the heater when designing the structure;


3. If you choose an external electric heater, you should also consider the anti-electric shock measures and the safety distance of the evaporator when the evaporator is frosted to ensure that there is no possibility of touching the human body, metal objects and frost layer. It is safer to choose an exterior insulated heater;


4. When the heater is connected to a three-phase power supply, a Y-type connection should be used, and the neutral point must be connected to the zero line to prevent the potential for high voltage at the heater terminal due to the unbalanced three-phase.


Send Inquiry