+8613456528940

Product data description of electric heating radiant tube

Jul 02, 2021

The inner core of the electric heating radiant tube is composed of resistance wires welded at the ends of the U-shaped axial arrangement and a ceramic support frame. There is no shield between the inner core and the outer protective sleeve, and the heat dissipation is good. In the electric heating radiant tube with a rated working temperature of 1000 degrees, the resistance wire is made of Cr20Ni80 or 0Cr21Al6Nb, and the surface working temperature can reach 1200 degrees. The maximum working temperature of the electric heating radiant tube with this material can reach 1000 degrees, and the support frame is high aluminum. Ceramic pieces. The outer protective sleeve is a cold-drawn seamless thin-walled heat-resistant steel pipe made of 1Cr25Ni20Si2 or 1Cr25Ni35Si2. The material has good high-temperature oxidation resistance, high high-temperature creep strength, and certain anti-carburization performance. The design and material selection safety factor of the radiant tube Larger.


The electric heating radiant tube with a rated working temperature of 1200 degrees, the resistance wire is made of 0Cr27Al7Mo2, and the surface working temperature can reach 1400 degrees. The short-term maximum working temperature of the electric heating radiant tube with this material is 1250 degrees, and the support frame is made of steel jade porcelain. . The outer protective sleeve is a cold-drawn seamless thin-walled heat-resistant steel pipe made of Fe-Ni-Cr-Al-Re alloy. This material has ultra-high oxidation resistance. It can work for a long time at 1300 degrees in an oxidizing atmosphere and has a short-term resistance at 1360 degrees. Oxidation. It is suitable for working in high temperature, low oxygen partial pressure and environment containing S and C.


In addition to supporting domestic heat treatment equipment manufacturers, the electric heating radiant tubes developed and produced by our factory can also research, design and manufacture non-standard heaters for users. According to the situation of use, they can be divided into: heat-resistant steel seamless tubes, plates Circle welded pipe, centrifugal cast pipe and non-metallic casing, etc.

Features of high temperature electric heating radiant tube:

  1. It is made of seamless cold-drawn heat-resistant steel pipes (the highest temperature is 1200 degrees) made of high-quality raw materials;

  2. The inner core adopts resistance wire U-shaped axial arrangement end welding method;

  3. The resistance wire and the ceramic frame are basically unshielded, and the temperature difference between the resistance wire and the furnace is small;

  4. The highest working temperature is 1000 degrees or 1200 degrees;

  5. The biggest advantage of the radiant tube produced by our company is the use of seamless cold-drawn, thin-walled heat-resistant steel pipe (1Cr25Ni20Si2 or 0Cr25Ni20Si2), and its heat radiation is 10% higher than similar products;

  6. Use more than 8000h.


In the production process, our factory strictly controls the following checks:

(1) Electric heating material off

The heating wire is required to have a high degree of heat resistance; the material has no impurities, no segregation, and strong oxidation resistance; in the process of use, it does not deform, penetrate, or leak.


Grade Cr Ni AL Mn P S C Fe

Cr20Ni80 20~23 margin ≤0.5 ≤0.6 ≤0.02 ≤0.02 ≤0.08 ≤1.0

0Cr25AL5 23~26 ≤0.06 4~7 ≤0.07 ≤0.02 ≤0.02 ≤0.06 margin

0Cr21AL6Nb 21~23 ≤0.06 5~7 ≤0.07 ≤0.02 ≤0.02 ≤0.05 margin

0Cr27AL7Mo2 26~28 ≤0.06 5~7 ≤0.02 ≤0.02 ≤0.02 ≤0.05 margin

(2) Refractory material off

The refractory material is required to be corundum. During the operation of the radiant tube, it has high high-temperature strength and high-temperature insulation capacity, and does not break or leak.


Performance

Refractoriness ℃ 1650

Bulk density g/cm3 2.8-3.0

Apparent porosity/% 15-18

Thermal expansion/% 0.6-0.8

Thermal shock stability℃/water cooling 80

(3) Protect the cover off

When the OCr25Ni20Si2 outer cover used in our factory generates heat locally, the tube body deforms very little, which has no effect on the heating element and the working environment in the furnace; it has strong heat resistance, and the normal use time is 6000~10000 hours, which is the leading domestic level.


Steel grade C Si Mn P S Cr Ni

1Cr25Ni20Si2 1.5-2.5 ≤1.5 ≤0.03 ≤0.03 ≥24.0 ≥18.4

(4) Production process

During the straightening process of the heating wire, there is no crack; during the welding process, the weld meat is full and smooth, without overheating segregation and virtual welding.

After a large number of customers have used it, it has been confirmed that under normal working temperature and load, the electric heating radiant tubes produced by our factory can be used for more than 8000 hours in a variety of furnaces. The factory welcomes people from all walks of life to come and give guidance, and is willing to discuss and make progress together with colleagues in the industry.


The electric heating radiant tubes designed and manufactured by our company have specifications for high, medium and low temperature furnaces and special atmosphere furnaces.


Send Inquiry