Key points of PTC heater use
PTC heater relative to electric heating tube and resistance wire heating products, this product is based on the characteristics of the material itself, according to the temperature change to adjust its own thermal power output, so it can optimize the heater's electric energy consumption control in a very small amount, while high fever obedience material also greatly improves the exercise of electric energy obedience.
Rapid temperature rise, fan failure can also automatically control the temperature, long service life voltage use range, can be between 12V-380V according to the demand plan planning convenient, can be from small power to high power any plan, the shape can also be planned according to the requirements without incineration, high temperature fan is safe and reliable, PTC fever does not red, no open flame in small and medium power heating places, PTC heating with constant temperature fever, no open flame, high thermal conversion rate, minimal influence by power supply voltage, long natural life and other ancient fever components can not be compared, The use of electric heating appliances is increasingly favored by R&D engineers Equipment and materials require that the electric idea should have a nameplate, indicating the name of the manufacturer, the date of delivery, the model, capacity, frequency, voltage, current, wiring skills, speed, temperature rise, working skills, insulation level and other related technical data of the electric idea.
PTC heater manufacturers PTC fever elements should be connected in parallel, when multiple PTCs are used together. No concatenation. The heating flap will not be damaged. After the liquid is boiled dry. When no air is supplied. If PTC heating plates are used to heat cold air. The heating flap will not be damaged. It is used under normal circumstances and has a long service life. The life expectancy can reach more than 10 years. The PTC heating sheet is used to control the temperature inside, and the homework is firm. Does not overtemperature. The change in surface temperature is very small. The homework voltage is very wide: when the homework voltage changes by a factor of 2. Should be connected in parallel, when multiple PTC heating plates are used together. No concatenation. The premise of not dissipating heat makes the fever power of PTC heating sheet very different.
Very post-stable. The stable power is related to the application premise, and the fever power changes from large to small after power-on. The same PTC fever device, the operating conditions are not the same, the power can also be several times different. The faster the heat dissipation, the greater the stable power; The higher the PTC surface temperature, the higher the power. It can also be controlled by a disconnect circuit, and the surface temperature of PTC fever parts is controlled by PTC itself. However, it is not possible to manipulate the surface temperature with a conditioned voltage. However, assuming the improper installation, the PTC itself is very strong and has a very long life. The product will show unstable power and temperature.
