The required temperature of the material to be heated in the heating equipment of the heat conduction oil furnace determines the working temperature of the heat conduction oil. The temperature of the heat conduction oil is higher than the temperature of the material to be heated. The larger the temperature difference, the smaller the heating area required. The temperature of the heat transfer oil is high, and some chemical materials are easy to crack and coke at high temperatures. Therefore, the temperature difference should be determined according to the specific conditions to avoid the heat transfer oil exceeding the maximum use temperature or damage the heated materials.
The heat-conducting oil furnace is the key equipment of the heating system. In order to avoid over-temperature coking, the flow rate of the heat-conducting oil in the furnace tube should not be too low, but too high a flow rate will increase the flow resistance and consume more circulation pump head and power. The exhaust gas temperature of the heat-conducting oil furnace is relatively high, generally 300-400°C. An auxiliary heating surface such as an air preheater or an energy-saving water heater should be added to the tail to reduce the exhaust gas temperature to improve thermal efficiency and save energy consumption.












