For how to use electric heating tubes, how to use electric heating tubes more effectively and safely, you will understand after reading this article!



The gap inside the heating tube is filled with magnesia sand. The magnesia sand at the outlet end of the heating tube is easily contaminated due to the infiltration of impurities and moisture. Therefore, pay attention to the state of the outlet end of the heating tube during operation to avoid leakage accidents caused by this.
When the electric heating tube is used for air heating, pay attention to the uniform arrangement of the electric heating tube. The advantage of this is to ensure that the electric heating tube has a relatively sufficient and uniform heat dissipation space, and ensure the fluidity of the air as much as possible, and improve the heating efficiency of the electric heating tube.
Heater
When the electric heating tube is used for heating liquid or metal solid, it must be noted that the electric heating tube must be completely placed in the object to be heated, and it is not allowed to burn the electric heating tube. After the electric heating tube is used, if there is scale or carbon on the outer metal shell, it should be removed in time to avoid affecting the heat dissipation performance and service life of the electric heating tube.
The electric heating tube has no special requirements for the temperature of the working environment, but the humidity of the air in the environment cannot be greater than 95%, and there should be no flammable, explosive or corrosive gas. The external working voltage of the electric heating tube cannot exceed 1.1 times of the rated voltage. Before the electric heating tube is operated, it must be ensured that the shell is effectively grounded to avoid electrical accidents.
The storage location of the electric heating tube is the same as the platinum rhodium thermocouple and other components. It must be kept dry and appropriate insulation resistance. If the insulation resistance of the storage environment of the electric heating tube is found to be too small during use, it can be used after being restored by low-voltage energization. The electric heating tube should be properly fixed before use, and the wiring part should be placed outside the insulation layer, and avoid contact with corrosive, explosive media and water.
How to use electric heating tubes more effectively and safely, not only requires attention to quality, but also needs to be more rational when using electric heating tubes. Reasonable use can increase the service life of electric heating tubes, better work operation, and ensure work quality .