1. The heating tube is broken. In this case, a new one needs to be replaced.
2. Power supply problems. If the power plug is broken, repair or replace it with a new one.
3. The problem of tap water pressure. The water pressure is too small, resulting in not reaching the heating standard, and the water pressure switch is placed inside the electric hot water faucet, and the water pressure is too low to trigger the water pressure switch. This situation requires increased water pressure.
4. Rebao is broken. In this case, you need to replace it with a new hot treasure.
Precautions for electric water faucets:
1. When installing, the faucet should try to avoid colliding with hard objects, and do not leave cement, glue, etc. on the surface, so as not to damage the gloss of the surface coating. Pay attention to remove debris from the pipe and install the faucet.
2. Don't open and close the faucet with too much force, just close it gently. Even a traditional faucet doesn't require much effort to screw. In particular, do not use the handle as an armrest for support or use.
3. The metal hose of the sprinkler head of the bathtub faucet should be kept in a natural stretch state, and should not be coiled on the faucet when not in use. At the same time, when in use or not in use, be careful not to form a dead angle at the connection between the hose and the valve body, so as not to break or damage the hose.
