The power problem of electric heating tubes is not only what customers need to consider, but also what every manufacturer needs to think about. The customer chooses a suitable electric heating tube from the electric heating tube manufacturer and uses it. The electric heating tube is damaged due to the power error. This seems to be a trivial matter. In fact, the company's brand reputation has been damaged, and the loss of customers has been buried. A factor. When a customer chooses the heating equipment produced by Yancheng Songtai Electrical Equipment Factory, you will get not only the safe use of heating equipment, but also Yancheng Songtai's industry reputation guarantee for many years and the technical support of senior maintenance experts in the industry.
When we usually choose, we will test whether the electric heating tube is working properly. The normal results obtained in the test can only indicate that the components of the equipment are in good condition. If the power does not go up, it means that the parameters of the equipment are not adjusted properly. The main reasons that affect the power of the electric heating tube equipment are not up.
1. The rectifier part is not adjusted properly, the rectifier tube is not fully turned on, and the DC voltage does not reach the rated value, which affects the power output.
2. In the production process of the electric heating tube, the length of the alloy wire will directly affect the resistance of the alloy wire.
3. The cut-off and cut-off values are adjusted improperly, and the power output is low.
4. If the compensation capacitor is configured too much or too little, the power output with the best electrical and thermal efficiency will not be obtained, that is, the best economic power output will not be obtained.
5. The allowable error range of the rated power of the electric heating tube: the electric heating tube with the rated power of the electric heating tube less than or equal to 100W: ±10%; the electric heating tube with the rated power of the electric heating tube greater than 100W: +5%~-10% or 10W, whichever is greater value.
