How to remove the ice on the aluminum tube of the cold storage?
The treatment methods for ice on aluminum tubes in cold storage are as follows:
1. Check whether the cold storage has the function of defrosting. The general cold storage will have the function of electric heating wire. If it is directly activated, it will evaporate the frost on the aluminum tube;
2. If there is no automatic frost and ice function, you can only use water to flush first, but this is a short-term method. Deicing with water will only become more and more serious. It is recommended to install heating wires on the fins of the air cooler to de-ice;
3. Installing an air curtain on the door of the freezer can reduce the convection between the cold storage and the outside air, and keep the air dry in the cold storage to reduce icing;
4. Add rubber curtains to the cold storage to prevent air-conditioning from leaking when moving things, and on the other hand, less humid air from outside will come in, making the frosting on the aluminum tubes better;
The frost on the aluminum tubes of the cold storage should be dealt with as soon as possible, which will not only cause the cooling effect to be greatly reduced, and the cold air flow will not be smooth, but also because the evaporator cannot absorb heat, the refrigerant in the compressor will cause "liquid strike" and damage. Therefore, you must do a good job of deicing and defrosting, but don't use tools to shovel, it is best to follow the above methods.
