Finned tube heat exchanger is also called high-frequency welded fin tube, commonly used in the drying system to heat the air, is the main equipment in the hot air device, correct maintenance can improve its service life and enhance the heat dissipation effect, maintenance should pay attention to the following 4 points:
Piles of finned tube radiators
1: Check the sealing surface of the tube bundle for leakage
Check in time whether the bonding between each fin tube and the rubber gasket is tight, whether there is leakage on the sealing surface of the tube bundle, and if there is a problem, it will affect the heat exchange effect, so timely inspection is a thing that is often done.
Industrial finned tube radiator
2: Regular cleaning and inspection
Regularly use steam or pressurized water gun to gently clean the dirt, oil stains, etc. attached to the finned tube to maintain heat exchange capacity and reduce air resistance.
3: Check the appearance
When the finned tube radiator fins are distorted, they must be corrected in time to allow them to ventilate smoothly.
4: Keep dry
The finned tube is exposed to the outside to avoid rainwater dripping, and it is kept dry as much as possible to avoid liquid corrosion after the finned tube is not easily found.
Molded finned tube heat sink
The less metal required per unit of heat transfer to the room by the finned tube radiator, the lower our cost and the better the economic performance. Therefore, the correct maintenance of the finned tube and the maintenance of heat transfer effect can reduce our economic costs to a certain extent, and you must not neglect the maintenance of the finned tube.



