We all know that if the evaporator of the cold storage frosts, it will affect the normal use of the cold storage, thereby affecting the quality and safety of the stored products, and causing great losses to the cold storage owner. Therefore, the defrosting work of the cold storage is necessary to be carried out regularly.
Generally, there are four main ways to defrost the cold storage, and I will explain them to you one by one.
Method/Procedure
Manual frost sweeping
Manual frost sweeping is a method for operators to remove frost directly on the surface of the evaporator with a removal tool in hand, which is generally only suitable for defrosting the wall pipe and top pipe of the frozen material refrigerator.
Artificial frost sweeping and frost does not melt, and the evaporator can still work normally during the defrosting process, but when the defrosting personnel want to enter the warehouse to operate, it is necessary to increase the heating and cooling consumption of personnel and labor costs.
The best way to defrost a cold store
Water to frost
Water frosting is the water spray pipe installed above the evaporator, defrosting through the spray pipe to the surface of the frost layer uniform spray water, water frosting method can only be used for the defrosting of the air cooler, generally and hot gas defrosting combined application, alone used only suitable for the air cooler frosting speed is slow, frost layer is relatively thin.
The best way to defrost a cold store
Hot gas defrosting
Hot gas defrosting uses the heat released by the superheated steam discharged from the compressor to melt the double layer on the surface of the evaporator when it condenses. This method has strong applicability, reasonable energy utilization, defrosting can also flush out the oil in the evaporator, but the defrosting time is longer, which has an impact on the storage temperature
The best way to defrost a cold store
Electric defrosting
In the small and medium-sized Freon refrigeration system, the method of electric defrosting is commonly used, which uses an electric defrosting air cooler, and the evaporator coil is inserted with an electric heating tube, and the operation of the air cooler needs to be stopped when defrosting. The defrosting of electric heating defrost is convenient, simple to operate, and easy to realize automatic control. However, this method consumes more electrical energy and has large temperature fluctuations in the cold room.



