The temperature of the aquarium is very important, and this heavy responsibility is on the heating rod, how to choose the aquarium heating rod method in detail.
1, the life of the heating rod: ordinary heating rod is recommended to be replaced once every two years, the internal bimetal sheet is used for a long time, easy to leak, after all, it is not a very expensive thing, change a heart is also more practical, so as not to occur some unnecessary losses.
2, is the glass or stainless steel is good: this is difficult to say, each has its own advantages, the price of general glass is low (except for some special processes), the use range is wide, can be used in various aquariums, the disadvantage is easy to break. Large fish tanks must be equipped with a protective cover if used to avoid spoiling the fish. The advantages of stainless steel are obvious, strong, durable, and the appearance looks very textured. However, the disadvantage is that corrosive environments cannot be used, such as sea tanks.




3, quality: in fact, domestic is also possible, there is no need to buy imported, the quality of the heating rod can be distinguished from many places, not necessarily expensive to be guaranteed, some expensive heating wire is different, some add explosion-proof performance, avoid glass explosion, etc., and stainless steel, many are used to electronically control the temperature, by a thermistor to detect the water temperature, after conversion control relay or high-power thyristor, etc., to control the on-off of the heating tube. This accuracy is higher than usual, but if there is a problem with thermistors or thyristors, it heats up faster than ordinary glass.
4. Repair of heating rod: if it is glass, generally the glass is damaged, so that only to change a shell, generally there are special glass tubes on the market for sale, when changing, pay attention not to move the adjustable snail on the bimetal sheet, or not to warm up. In addition, pay attention to the seal during installation to avoid water leakage. Stainless steel is generally nothing to repair, broken to replace one. If it is an external temperature regulation, you can find a general home appliance repair shop and let them help see, most of them are thyristor burning.
5. How big is the cylinder and how big is the heating rod? Generally, the water volume of the fish tank is calculated first, one liter of water is better than the heating rod of 1.5W-2W, for example, the water capacity is 100 liters, which can be used from 150W to 200W. If you have a large cylinder, such as a cylinder with a water capacity of 300-400 liters, you should use a 500W cylinder.
Notes
If the shell of the heating rod is broken when you usually use it, don't panic, generally the fish will not be electrocuted, as long as the electricity is cut off and taken out to replace one. Many netizens are not paying attention when changing the water, did not break the heating rod, when the water surface gradually drops, lower than the heating rod, the heating rod due to uneven heating, the shell is broken, at this time if there is a fish nearby, it is easy to break, normal use is generally not bad, are everyone in the water change or cleaning when taking out the water surface, no power off, or accidentally touching a hard place caused. Be careful to power off for a while before taking it out.