Heating plate carbon fiber heating element is the most competitive new technology raw material in the 21st century. Its occurrence has caused a new reform in the electric heating industry. The replacement of metal material heating element by carbon fiber heating element will become a certain development trend.
The thin stainless steel base decorative ring carbon fiber infrared induction quartz heating tube is a new technology product that is different from traditional heating tubes such as iron wires and halogen bulbs. It has a long service life, high efficiency of electrothermal conversion, infrared induction radiation source, physical and mental health and environmental protection. And other outstanding performance.
Product performance characteristics
Stable performance of electrical equipment
After the carbon fiber quartz heating tube is plugged in, the output power is stable within a certain dimensional tolerance range in frequent operation, shut down and long-term continuous work, and it is not easy to cause all instantaneous output power shocks.
High thermal efficiency, the carbon fiber heating element is a pure black-faced raw material. During the whole process of electrothermal conversion, there is very little visible light. The electrothermal conversion efficiency is more than 95%, which is higher than nickel, chromium, tungsten, molybdenum and the raw material as the heating element. The electric heater is environmentally friendly and energy-saving by 30%; under the same output power, the temperature of the radiation source is 30℃ higher than that of the nickel-chromium alloy metal electric heating tube, and 15℃ higher than that of the tungsten-molybdenum wire quartz electric heating tube. The transmitted infrared sensor is immediately super strong by the body, clothes, water, etc., and the heat generation is less damaged in the whole process of thermal convection; it has stronger digestion and absorption of sugar, and has excellent oxygen atom series resonance effect, and the product efficiency is further improved.
The carbon fiber heating element has the characteristics of rapid temperature increase, small heat lag, uniform heat, long-distance transmission of radiant heat, and faster heat exchanger speed. In the whole process of work, the lumen value is much lower than the hot plate of the laminated glass teapot with the metal heating element, and the high efficiency of electric heat conversion is above 95% (in other words, you use a general electric heating tube of 1000w, and a carbon fiber electric heating tube. In this case, only 700W is required).
