If you pay attention, the pet heating pad is not completely safe, there are certain safety hazards, and the owner needs to pay more attention; When using heating pads, be sure to choose a temperature-controlled product. If not, you will need to configure a separate temperature probe and place the temperature probe in the appropriate position.
Are pet heating pads safe
If you pay attention, the pet heating pad is not completely safe, there are certain safety hazards, and the owner needs to pay more attention; If the temperature control probe is placed on the back plate or cushion, it will cause temperature measurement problems, resulting in too high temperature of the mat and harming the pet; Therefore, the temperature control probe must be placed under the mat to prevent the temperature of the cushion from being too high, and when the temperature rises to a dangerous value, the heating process can be cut off to ensure the safety of pets.
Precautions for the use of pet heating pads
1. When using heating pads, be sure to choose products with controllable temperature. If not, you will need to configure a separate temperature probe and place the temperature probe in the appropriate position.
2. Need to choose the right cushion, some cushions have very poor thermal conductivity, so with the heating pad is a very bad choice. Generally, fibrous bedding will be better; Generally, coconut shell, coconut powder, poplar wood chips, etc. sold are generally not used with heating pads.
The safety of heating pads requires our great attention, the failure of temperature control probes, physical damage to electrical appliances will directly lead to pet life problems, it is recommended to avoid use! If so, the following are recommended:
1. Vertical, wall-mounted
2. Install sensitive temperature control to prevent temperature control problems of the heating pad itself. The bedding can be selected with special crawler paper, etc. In addition, the crawler's abdomen is close to the bottom will also cause heat accumulation, if the temperature control problem occurs at this time, the temperature rises, the crawler cannot dissipate excess heat and is 'baked dry' alive.
