1. PTC thermistor is also called positive temperature coefficient thermistor, most of today's hot air curtain machines use this kind of heating element. After the current passes through the element, the temperature rises, that is, the temperature of the heating element rises. When the Curie point temperature (240 degrees) is exceeded, the resistance increases, thereby limiting the current increase, so the drop of the current causes the temperature of the element to decrease, and the resistance value decreases. In addition, the circuit current increases, the component temperature rises, and the cycle reciprocates, so it has the function of keeping the temperature within a specific range. The hot air curtain made of this component has the characteristics of fast heating, constant temperature and power saving, and can also be used for electrical appliances. To overheating maintenance function. (PTC is mainly composed of barium titanate, supplemented by other polycrystalline ceramic materials.)



2. Some low-cost products have less barium titanate in PTC, which can't save electricity and have the effect of constant temperature.
3. In our daily use, we can inspect the current of the hot air curtain to check whether we can use qualified PTC components. After the hot air curtain is used for 2 hours, the current should become a downward trend, and the pointer gradually shakes.
4. It should save energy about 50% when applied in the drying box, and about 30% when applied on the hot air curtain.