The excellent effect of carbon fiber material heating wire, carbon fiber material is a new type of high functional fabric to improve raw materials, with high toughness, high modulus, heat resistance, wear resistance, fatigue relief, corrosion resistance, stress relaxation resistance, electrical conductivity and Heat transfer and many other excellent effects. It can reduce the net weight of prefabricated components, and then enhance the professional skills of prefabricated components. Therefore, the use of carbon fiber material as an electric heating body has many excellent effects that metal materials, PTC and other electric heating bodies are not good at:
1. The temperature is raised quickly, which can cause the body's necessary eternal vows. Far-infrared 8μm-15μm.
2. Carbon fiber heating wire: It is covered with high temperature resistant carbon fiber material and has good heat resistance. It is widely used in defrosting components in refrigerators and freezers. The power can generally be 40W/m. Under ultra-low temperature conditions with excellent heat removal, a power of 50W/m can be achieved. The maximum application ambient temperature is generally up to 150 ℃.
3. The output power of electric heating conversion is high, which saves electromagnetic energy. The carbon fiber material electric heating body is a kind of raw material with full bold characters. The output power of electric heating conversion is 30% higher than that of metal materials, and the output power of electric heating is about 100%.
4. High compressive strength. Under the same total area of current load, the compressive strength of carbon fiber material is 6-10 times higher than that of iron wire, and it is not easy to cause breakage in the whole process of application, so it is resistant to resistance in the whole process of electric heating. The compression strength did not change.
5. No arcing when disconnected, effectively avoid fire accidents, light weight, effectively alleviate the net weight of prefabricated components, and subsequently improve the professional skills of prefabricated components.
6. The organic chemical effect is stable, anti-corrosion, not easy to be oxidized. When heated to 3000 degrees under anaerobic exercise, its mechanical equipment does not cause any changes. In the case of electric heating, it gets rid of iron wire, PTC, and carbon-carbon composite materials. The electric heating body has low compressive strength and is easy to be burnt out by air oxidation. shortcoming.
7. The service life is long, and the carbon fiber heating wire has the same service life as the building.