1. Chemical materials in the chemical industry are heated and heated, some powder drying under a certain pressure, chemical process and jet drying must be realized through fin elec
Jan 20, 2023
Stainless steel fin dry-fired electric heating tube is wound metal heat sink on the surface of ordinary components, and the heat dissipation area is expanded by 2~3 times compared
The length of the heating wire in the heating tube before it is pulled apart cannot be shorter than 1/4 of the tube; if the heating wire is spirally unfolded in the heating tube, t
Jan 19, 2023
Different electric heating tubes are used differently, the wire inside is the resistance wire with the useful nickel, what wire to use depends on many factors
The thickness of the heating wire is related to the power, and the higher the power of the electric heating tube, the thickest heating wire. The opposite is fine. The smallest heat
Friends who have used microwave ovens must know that microwave ovens occasionally have some minor failures, such as microwave ovens do not heat, this failure may appear more, below
Jan 18, 2023
Jiuyang rice cooker cooks rice without jumping to keep warm. What a strange glitch this is I am a maintenance master in the category of small household appliances, and generally re
The resistance wire inside the heating tube expands and deforms when it heats up, and contacts with the tube wall to cause short circuit tripping. The heating tube needs to be repl
Induction cooker gap type conduction, in layman's terms, heating intermittent, as if to heat and can not start, the bottom of the pot sucks and puts it down, there is a slight clic
There are many reasons why the induction cooker is energized and does not heat, and the following are summarized as follows. First, the key fails, and the press does not start. Sec
Parallel connection. 1. Parallel connection is literally understood as a parallel connection, there are more than two resistors, one end of them is connected together, the other en
Jan 13, 2023
Heat transfer begins when one end of the heat pipe is placed at a higher temp e other end is at a lower temperature. The heat first passes through the metal tube wall into the capi
