We strive to ensure customer experience after product delivery and enhance the added value of our straight rod heating elements, Electric Fins heating, electric food warmer heater. Today, we are able to provide customers with a wide range of products of excellent quality because of the company's aim of continuous product improvement and the efforts made by all employees to achieve this goal. Stability is not stagnation, nor is it a denial of new peace and change, but a foundation for steady growth. We adhere to the business tenet of 'craftsman spirit, quality is great', and resolutely resist the production of inferior and unqualified products for supply and marketing customers.

Description

On tape and rope heaters, heating resistances inside the fiberglass tubes. When it connect to electricity, and the heating resistances heat up and the heat conducted through glass fibers.

Long service life, the insulation material is multi-layer alkali-free glass fiber, with good temperature resistance and reliable insulation performance. The utility model has the advantages of soft structure, can be directly wound on the surface of the heated part when used, and has uniform temperature, simple installation, convenient use, safety and reliability.

Common Specifications

How to install the tape and rope heaters:

Step 1: Pipe Surface Preparation

Prepare surface to be heated: Wipe the surface making sure there is no foreign material, like liquid, on the surface. Foreign material inhibits heat transfer and liquid can damage select models of heating tape (i.e. HighTemperature Heating Tapes).

Make a visual inspection of heating tape: We recommend that you replace the heating tape if it becomes torn or damaged. Damaged heating tape is a safety hazard and will not operate correctly.

Step 2: Heating Tape Installation (wrap)

Heating tape can be installed on nearly any surface due to its flexibility. Spiral wrap the heating tape onto the surface to be heated so that the length of one entire side of the heating tape is in full contact with the surface .The distance between spiral wraps is dependent on the uniformity requirements and the amount of available heating tape. A minimum distance of 1/8" is required between spiral wraps to avoid damage to the heating tape.

Attach the heating tape to the surface by either using built-in tie straps, high-temperature adhesive tape or mechanical clamping devices that will not cause damage to the heating tape.

Ensure the heating tape is not kinked, twisted, or hanging free from the surface.

Do not overlap heating tape on itself.This can cause damage to the heating tape due to overheating.

Step 3: Connecting Your Heating Tape to a Temperature Controlling Device

Your heating tape must be connected to an external temperature control device. Ensure your temperature controller is protected by a properly sized circuit breaker or fuse. Use of a ground fault circuit interrupter is highly recommended and may be required for your installation.

For proper temperature control, secure a thermocouple, RTD, or other sensing device with one strip of adhesive tape so that it is in close proximity to the heater to prevent overheating.

Some Photos for other Production

Write to us for any questions, you are welcome all the time.

Our company continuously improves the quality of USB Electric Heating Pad Thermal Clothes Heated Pad and enhances the trust of customers. We have strengthened our diversified business layout through business innovation and integration of quality industrial resources. We will establish a more complete mechanism, actively assume responsibility, and formulate procedures that can be implemented steadily to ensure our company can grow steadily.

Hot Tags: tape and rope heaters, China, suppliers, manufacturers, factory, custom, wholesale, Mica base heating sheet, mica thermal heater, industrial tubular heater, fermentation heating tubes, NTC thermistor, copper hot runner heater