Our tubular ceramic heater, electric immersion heaters, hot water immersion heater combines the latest technology and practicality and will be the most suitable products for our customers' needs. We always implement innovations in concepts, technologies, management, mechanisms, and marketing. We have optimized our production processes and work methods through continuous improvement initiatives.

Description

On tape and rope heaters, heating resistances inside the fiberglass tubes. When it connect to electricity, and the heating resistances heat up and the heat conducted through glass fibers.

Long service life, the insulation material is multi-layer alkali-free glass fiber, with good temperature resistance and reliable insulation performance. The utility model has the advantages of soft structure, can be directly wound on the surface of the heated part when used, and has uniform temperature, simple installation, convenient use, safety and reliability.

Common Specifications

How to install the tape and rope heaters:

Step 1: Pipe Surface Preparation

Prepare surface to be heated: Wipe the surface making sure there is no foreign material, like liquid, on the surface. Foreign material inhibits heat transfer and liquid can damage select models of heating tape (i.e. HighTemperature Heating Tapes).

Make a visual inspection of heating tape: We recommend that you replace the heating tape if it becomes torn or damaged. Damaged heating tape is a safety hazard and will not operate correctly.

Step 2: Heating Tape Installation (wrap)

Heating tape can be installed on nearly any surface due to its flexibility. Spiral wrap the heating tape onto the surface to be heated so that the length of one entire side of the heating tape is in full contact with the surface .The distance between spiral wraps is dependent on the uniformity requirements and the amount of available heating tape. A minimum distance of 1/8" is required between spiral wraps to avoid damage to the heating tape.

Attach the heating tape to the surface by either using built-in tie straps, high-temperature adhesive tape or mechanical clamping devices that will not cause damage to the heating tape.

Ensure the heating tape is not kinked, twisted, or hanging free from the surface.

Do not overlap heating tape on itself.This can cause damage to the heating tape due to overheating.

Step 3: Connecting Your Heating Tape to a Temperature Controlling Device

Your heating tape must be connected to an external temperature control device. Ensure your temperature controller is protected by a properly sized circuit breaker or fuse. Use of a ground fault circuit interrupter is highly recommended and may be required for your installation.

For proper temperature control, secure a thermocouple, RTD, or other sensing device with one strip of adhesive tape so that it is in close proximity to the heater to prevent overheating.

Some Photos for other Production

Write to us for any questions, you are welcome all the time.

Our company specializes in the production and processing of Textile Cable Power Cord with Euro Plug and Inline Switch and other products with a complete and scientific quality management system. We aim at 100% product qualification rate, 100% contract fulfillment rate, and 100% service satisfaction rate. Adhering to the concept of 'User's success is our achievement', we sincerely welcome friends from all walks of life to come and guide us. We strive to be the main force in increasing storage and production, and a responsible corporate citizen.

Hot Tags: tape and rope heaters, China, suppliers, manufacturers, factory, custom, wholesale, Electronic Cigarette Heater Film, small portable heating pad, distilling heating element, Ceramic heating element Igniter, hot water heating pad, roof heating wire