
Customized Silicone Heater and Crankcase Heater
Product Introduction
We always adhere to the development strategy led by operating SS304 heating tube, sheathed heating element, rechargeable heating pad, and uphold the business philosophy of seeking credibility by quality and development by credibility. We have a high level of theory and rich practical experience. Our company has advanced research and development system, product automatic assembly line, product testing and a complete set of perfect technology and equipment, which provides a solid guarantee and foundation for the excellent quality and high efficiency of products.
Description
After the air cooler operates for some time, its blade will freeze, at the time, the drain pipe heaters and antifreezing heating wire can be used for defrosting to let molten water discharge out of the refrigerator through the drain pipe.
As the front end of the drain pipe is installed in the refrigerator, defrosted water is frozen under 0°C to block the drain pipe, and heating wire is needed to install to ensure that defrosted water doesn't freeze in the drain pipe. The heating wire is installed in the drain pipe to defrost and heat the pipe at the same time to let water exhaust smoothly.
Specifications
Heating Body | NiCr or Cu-Ni Alloy | Length/M | 40W/M | 50W/M | ||
Tail End of Heating Body | Seal Tail End of Colloidal Silica | 1 | 40W | 50W | ||
Maximum Surface Temperature | 200°C | 1.3 | 52W | 65W | ||
Minimum Surface Temperature | --60°C | 1.5 | 60W | 75W | ||
Immergence Withstand Voltage | AC2500V V/min | 2.0 | 80W | 100W | ||
Voltage | 220-230V | Shape | Average7*5mm | 3.0 | 120W | 150W |
Power | ±5% | Output Power | 40-50W/M | 4.0 | 160W | 200W |
Tape Body Length | ±5mm | Insulation Resistance | ≥200MN | 5.0 | 200W | 250W |
Tolerance | ±10% | Leaking Current | ≤0.2MA | 6.0 | 240W | 300W |
Production Pictures
![]() | ![]() | ![]() |
![]() | ![]() | ![]() |
![]() | ![]() | ![]() |
![]() | ![]() | ![]() |
![]() | ![]() | ![]() |
Start to custom made the samples or production, send email to us as below.

We reduce the production and innovation cost of our company and improve the technological content of our Customized Silicone Heater and Crankcase Heater. Taking care of customer dissatisfaction, complaints and complaints is not only the core link of enterprise customer contact, but also the key to improve the overall service level of the enterprise. We have adopted the international refined management mode and established a huge domestic and foreign procurement and sales network.
Hot Tags: drain pipe heaters, China, suppliers, manufacturers, factory, custom, wholesale, microwaveable heating pads, supplemental ptc heater, Silicon Heating Pad, Food Warmer Heaters, Micro thermal switch, high temperature heating element
SPEC DATA
Send Inquiry














