Our Aluminum Cast Heaters, Two Wire Temperature Controller, dehydrator heating element has made remarkable achievements with excellent production technology and product quality since it has been facing the market. Corporate vision is a long-term description of what an enterprise is striving for, and indicates the long-term development goals of the enterprise. Our customers' needs are at the heart of our actions, and customer satisfaction is the cornerstone of our success. We are committed to growing our business in the global marketplace through long-term partnerships with industry leaders. On the road of achieving our dream, our company has grown from small to large, from big to strong, from strong to excellent.

Description

On tape and rope heaters, heating resistances inside the fiberglass tubes. When it connect to electricity, and the heating resistances heat up and the heat conducted through glass fibers.

Long service life, the insulation material is multi-layer alkali-free glass fiber, with good temperature resistance and reliable insulation performance. The utility model has the advantages of soft structure, can be directly wound on the surface of the heated part when used, and has uniform temperature, simple installation, convenient use, safety and reliability.

Common Specifications

How to install the tape and rope heaters:

Step 1: Pipe Surface Preparation

Prepare surface to be heated: Wipe the surface making sure there is no foreign material, like liquid, on the surface. Foreign material inhibits heat transfer and liquid can damage select models of heating tape (i.e. HighTemperature Heating Tapes).

Make a visual inspection of heating tape: We recommend that you replace the heating tape if it becomes torn or damaged. Damaged heating tape is a safety hazard and will not operate correctly.

Step 2: Heating Tape Installation (wrap)

Heating tape can be installed on nearly any surface due to its flexibility. Spiral wrap the heating tape onto the surface to be heated so that the length of one entire side of the heating tape is in full contact with the surface .The distance between spiral wraps is dependent on the uniformity requirements and the amount of available heating tape. A minimum distance of 1/8" is required between spiral wraps to avoid damage to the heating tape.

Attach the heating tape to the surface by either using built-in tie straps, high-temperature adhesive tape or mechanical clamping devices that will not cause damage to the heating tape.

Ensure the heating tape is not kinked, twisted, or hanging free from the surface.

Do not overlap heating tape on itself.This can cause damage to the heating tape due to overheating.

Step 3: Connecting Your Heating Tape to a Temperature Controlling Device

Your heating tape must be connected to an external temperature control device. Ensure your temperature controller is protected by a properly sized circuit breaker or fuse. Use of a ground fault circuit interrupter is highly recommended and may be required for your installation.

For proper temperature control, secure a thermocouple, RTD, or other sensing device with one strip of adhesive tape so that it is in close proximity to the heater to prevent overheating.

Some Photos for other Production

Write to us for any questions, you are welcome all the time.

We pay close attention to the quality, delivery, value and technology of our Chemical Resistant Pure PTFE Adhesive Tape for Electric Industry and services. We believe that creating new value is also our social mission, and we will work hard with this mission. We manage the enterprise in a rigorous attitude and scientific way, so that the enterprise will keep moving forward to higher and stronger.

Hot Tags: tape and rope heaters, China, suppliers, manufacturers, factory, custom, wholesale, lower back heating pad, nichrome heating element, heating pad wrap, fryer heaters, grill pro electric charcoal starter, Brew Heat Belt