We will continue to improve corporate management capabilities, improve the technology content of Plug Tubular Heaters, Drum Band Heater, Resistance Heating Strips, and promote industrial upgrading. The quality of the products produced by the company is stable and reliable, and the annual customer satisfaction rate has reached more than 90%. We always adhere to the business philosophy of innovation, unity, sharing and dedication, and are committed to providing customers with satisfactory quality and service.

Description

Cast Copper Heating Element is constructed by winding a nickel-chrome resistance

Precautions for the use of cast aluminum electric heaters:

1. The working voltage shall not exceed the rated value; the relative humidity of the air is not large, and there is no explosive/explosive and corrosive/corrosive gas.

2. The wiring part is placed outside the heating layer and the thermal insulation layer, and the shell should be grounded; avoid contact with corrosive/corrosive, explosive/explosive media, and moisture; the lead wire should be able to withstand the temperature and heating load of the wiring part for a long time. Avoid excessive force when tightening.

3. The metal casting heater should be placed in a dry place. If the insulation resistance is lower than 1MΩ due to long-term storage, it can be baked in an oven at about 200 degrees Celsius for 5-6 hours, and it can return to normal. Or reduce the voltage and energize until the insulation resistance is restored.

4. The metal casting heater should be well positioned and fixed. The heating area needs to be closely attached to the heating body, and empty burning is strictly prohibited. When dust or pollutants are found on the surface, it should be cleaned up and reused in time, so as not to affect the heat dissipation and shorten the service life.

5. The magnesium oxide powder at the outlet end of the electric heating tube can avoid the infiltration of pollutants and moisture in the use site, and prevent the occurrence of electric leakage accidents.

When ordering, please provide:

1. Specific size requirements: length (mm) * width (mm); diameter (mm) * Height (mm)

2. Use voltage: 380V, 220V, 110V, 36V. . . etc., customized according to customer needs

3. Power: we generally do it according to a square centimeter of 2.5-3.5W.

Main uses: Widely used in plastic machinery, molds, cable machinery, alloy die-casting machines, pipelines, chemicals, rubber, petroleum, and other equipment.

Other Production Pictures

Packing and shipping

Customized Service Contact information, please kindly see below:

We have developed a series of new Band Cast in Aluminium Heater through the fruitful transformation mode of cooperative introduction, digestion and absorption, and independent innovation. The development of the enterprise needs the simultaneous development of talents. If we do not actively learn and progress, we may not be able to keep up with the development of the enterprise, and only by continuous learning and continuous progress can we add value to the enterprise continuously, which is the talent we are most eager for. The company respects credit, abides by contracts, guarantees product quality, and has won the trust of customers with its multi-variety operating characteristics and the principle of small profits but quick turnover.

Hot Tags: copper heating element, China, suppliers, manufacturers, factory, custom, wholesale, Sauna heating elements, Micro thermal switch, fermentation heating tubes, electric heating tube, PTC heater for clothes dryer, immersion cartridge heaters