Our Crankcase Heater for Air Conditioner, Roof Ice Heaters, Stainless Steel Defrost Heating Tubes has a wide range, complete sizes and conform to international and domestic standards. We will always insist on the power of wisdom, technology and culture to establish the corporate image of keeping integrity, responsibility and efficiency. Our company is committed to: talent cultivation, new product development, technology innovation, product upgrading. It is impossible for us to engage in innovation behind closed doors and we are willing to carry out mutually beneficial and win-win innovation cooperation with all enterprises with sincere will.

Description

Various ceramic electric heaters developed by our company according to international advanced products have a very wide range of uses. Ceramic heaters are also known as flexible heaters in the world. They are made of high-quality nickel-chromium alloy wire cables and coated with high-purity alumina ceramic insulating parts to make crawler-type or rope-type heaters and other product forms. It can be made according to the shape and size of the workpiece, and can be spliced, bent, wound, and heated close to the workpiece, and the surface temperature can reach 1050 °C. It has the characteristics of a wide range of use, fast heating rate, high heat utilization rate, significant energy saving, low labor intensity, and convenient operation. It is suitable for various metal components, such as welding preheating of large towers, high-pressure vessels, bridges, and high-pressure pipelines, and stress relief after welding. It can also be used for auxiliary heating of chemical pipelines, vessels, etc. It is ideal local heating equipment.

The length and width of the crawler electric heater can be flexibly changed, and the corresponding specifications should be selected according to the geometric shape, wall thickness, and heat treatment process requirements of the workpiece. The following table lists only some of the specifications. In addition, the crawler heater can also be equipped with thermal insulation materials and a shell to make a self-insulating heater, and its shape can be a flat plate, a right angle, etc., which is convenient to use.

Features:

1. It has a winding property. For example, when heating a container or a pipe, it can be bent into an arc or round to cover the surface for heating. For example, when a large workpiece is heated, partial coverage can be used, and the large area workpiece can be covered with a tile. In addition, it can be suitable for heating workpieces of various geometric shapes.

2. High working temperature, fast heating, high thermal efficiency, no pollution, uniform, and accurate heating, and automatic control can be realized.

3. High mechanical strength, good thermal insulation performance, large contact surface with the heated object, and long service life.

4. It is easy to install and maintain, and the use cost is also low. Even if the internal heating material is damaged, the external ceramic devices can still be reused.

Technical indicators of crawler heater:

1. Dielectric strength: 2000V/1 minute

2. Thermal insulation resistance: >5MΩ

3.~Working temperature: 1050℃

Installation instructions for crawler heaters:

1. According to the size of the equipment and the workpiece, it can be evenly arranged with a single component or multiple components. The fixing method during installation can be tied with stainless steel wire or bent into a tightening ring shape, and then fastened with screws in series.

2. From the consideration of temperature requirements and energy-saving, the outside of the heater should be covered with insulation material of 6-8cm and a temperature controller.

3. The heaters are not allowed to overlap during use, so as not to form an overheating area and affect life. Be careful not to break the porcelain parts, so as not to expose the electric heating material and affect safety.

4. The heated workpiece must be reliably grounded. The working voltage shall not exceed 1.05 times the rated voltage.

The complete heat treatment equipment for metal components consists of three parts, namely ceramic electric heater, temperature control box, and auxiliary materials.

1. Ceramic electric heater: the heating element, which is the source of heat when the workpiece is heated. Our company provides you with a variety of models and specifications, each of which has its own characteristics and performance. Such as LCD type crawler heater, SCD type rope heater, NJ type internal heating frame heater, etc., generally need users to choose according to the shape, thickness, and required temperature value of the workpiece to be heated.

2. Temperature control box: It is matched with the ceramic electric heater, provides power for the ceramic electric heater, and controls its working state to achieve the purpose of temperature control. The temperature control box is equipped with a temperature controller, which is used to control and measure the temperature of the workpiece, and the configured temperature recorder is used to record the temperature curve of the workpiece in real-time for the user to archive. At present, our company provides users with various types of temperature control boxes, such as ZWK, WCK, RWK series intelligent temperature program control boxes, DWK, TCS series computer temperature control boxes, LWK series temperature control boxes, etc. Users need to choose the ideal and practical temperature control box according to the heating range, heating process requirements, and on-site requirements.

3. Auxiliary materials: There are mainly KJ-type quick-connecting wires (connecting wires for the distance between the temperature control box and the heater, also used for 36V, 55V, 110V, and other heaters in series, and equipped with quick-connecting plugs), thermocouples (temperature sensors), used to measure the temperature of the heated workpiece), compensation wire (connecting wire between the thermocouple and the temperature control box), aluminum silicate high-temperature insulation cotton (to prevent heat dissipation)

Technical Detail

Insulation: Aluminium Oxide Ceramics (96%)

Heating Conductor: Ni-Cr wire(Cr20Ni80), 19 single strands

Temperature: Max. 1050 C

Power: 2.7/3.6 kW

Voltage: 60/ 80V

Amperage: 45A

Features

1. High Temperature Resistance

2. Excellent Insulating Property

3. Efficient Thermal Conductivity

4. Significant Energy-saving

5. Flexible Ceramic Heater Pad

Our Other Production Pictures

How to order? Pls provide this informations:

1. Vottage: 60V, 80V and other can be customized.

2. Wattage: 1000W, 1500W, 2000W and other can be customized.

3. Heater Width.

4. Heater Length.

5. Lead Wire Length.

6. Other special requirements if you have.

7. Quantity: the mini order quantity is 5pcs.

How to contact us?

See below our business card, hope you are all the best!

We strive to provide customers with the most optimized design solutions to reduce the overall cost of the Alumina Flexible Ceramic Heater Pad/Heating Element. We hope to ensure that the total number, structure, quality and capability of talents match the business development of the company. Our company relies on the abundant fund, the technical strength and the rich experience, to the user, the staff and each partner implements the sincere principle, has established the good faith image in the profession.

Hot Tags: flexible ceramic pad heaters, China, suppliers, manufacturers, factory, custom, wholesale, Bobbin Heaters, Explosion proof PTC heater, Micanite elements, Ceramic Infrared Thermocouple Heaters, industrial flexible heater, PVC heating cord

[[ProKeywords]]